Not much more to say except, this is one sick project.

PRESTIGE DIAMOND TEC WINDSHIELD PROTECTION FILM

Prestige Film Technologies knocked this one out of the ballpark. We had used / tested Clearplex for Madico when it was first released and did not last in our tests. For Prestige's Diamond Tec, we began testing this product in 2009 and up until recently did we get the green light to carry / install this product. (we spent over 15000 miles on our company vehicles as test vehicles and this windshield protection film got the thumbs from our techs here). More durable than the other windshield protection film by Clearplex (in our opinion) and its optical clarity can only be categorized as super clear. Some of the benefits:

*4 mils thick with tougher hardcoat
*resistant to windshield wiper scratches
*99.5% UV rejection
*protects from road debris, rock chips, etc.

FULL VEHICLE SATIN GUARD™

Satin Guard is a product that is much thicker than conventional vinyl. No, it is not matte as matte vinyl leaves a very dull and unfinished look. Satin Guard™ is a protective film that creates a nice satin finish and has the DualTone™ Technology built into it to offer two different sheens based on lower / brighter lighting conditions. Satin Guard™ protects like conventional paint protection film (clear bra) and does not affect OEM paint, which means it can be removed at a later time without affecting your factory paint.

9500Ci LASER JAMMER SYSTEM

This is the Rolls Royce of laser jamming and radar detection by Passport. By deflecting the laser signal, it will allow ample time to slow the vehicle down to a legal speed. What makes our install unique is how we integrate it to OEM parts of the vehicle to essentially make it a part of the car.

Many of these installs are visible to the naked eye from even at 5 feet away. Our specialty is to install these units without it looking like it is aftermarket; yet, will not affect its performance.

DIAMOND CUT IR NANO TINT
This film has been around for some time. The newer technology surpassing ceramics, this film will reject 94% of infrared rays, which ultimately means a cooler interior for your vehicle. Coupled with UV rejection at 99.5%, this product is designed for the luxury / exotics of today.

*shade chosen for this CLK63 Black Series - 63% Windshield and 50% Sides / Rear
*infrared rejection at 94% compared to conventional window tint at 40%-50% and ceramic tint at 70%-80%



SUBSCRIBE TO THIS THREAD AS WE WILL UPDATE IT WITH PHOTOS ON A DAILY BASIS!!!!!!!

 

Continuing the madness!!!! More photos of the Diamond Tec windshield protection film. The film needs to be heat shrunk, but at 4 mils thick and a pretty tough hardcoat, it is a challenge even for the most experienced window tinter. Some have questioned the need for windshield protection film and here are some reasons:

*retention of OEM installed windshield
*windshield is a safety item on the vehicle and if it is damaged by road debris, this will need to be replaced
*millions of windshields are replaced every year, but there is very little regulation on how it is installed. If the windshield is not installed properly, structural integrity (roof rigidness) and the ability for the airbag to properly protect and deploy is severely affected

 

Now, to move onto the 9500Ci Custom Laser Jammer install. Front and rear bumper off for custom mount.

 

And the custom leather wrapped custom display module for the 9500Ci laser jammer

 

Completed photos with the grille placed back onto the car

 

Impressive product. Too late for the windshield on my older cars, but for a new vehicle, it's a no-brainer.

 

More photos showing the 9500ci stealth installation on this CLK63 Black Series

 

Enter Content

 

Continuing the madness. Just to reiterate this entire project:

Diamond Tec Windshield Protection Film
- 4mils thick
- protects from road debris, rock chips, pitting
- optically clear
- 99.5% uv rejection
- 10% total solar heat rejection

9500Ci Custom Laser Jammer + Radar Detector
- laser jammers' fully integrated into vehicle and not the typical frontal mount where it is very visible.

Satin Guard™
- 8 mils thick
- DualTone Technology that exhibits two different sheens based on lighting conditions
- fully wrapped onto entire vehicle

Diamond Cut IR Nano Tint
- rejects 94% of infrared rays vs. conventional tint at 30%-40% and ceramic tints at 70%-80%
-50% sides + 63% windshield

 

Diamond Tec Windshield Protection Film
- 4mils thick
- protects from road debris, rock chips, pitting
- optically clear
- 99.5% uv rejection
- 10% total solar heat rejection
- 2 year 20,000 mile warranty from bubbling, fading, peeling, and purpling
- We are now an authorized dealer of Prestige Film Technologies and also their exclusive training facility for this product. Dealers interested in becoming certified dealer, please contact Prestige directly as they facilitate this program with us - sales@prestige-films.com

9500Ci Custom Laser Jammer + Radar Detector
- laser jammers' fully integrated into vehicle and not the typical frontal mount where it is very visible.

Satin Guard™
- 8 mils thick
- DualTone Technology that exhibits two different sheens based on lighting conditions
- fully wrapped onto entire vehicle

Diamond Cut IR Nano Tint
- rejects 94% of infrared rays vs. conventional tint at 30%-40% and ceramic tints at 70%-80%
-50% sides + 63% windshield
- Lifetime Warranty from bubbling, fading, peeling, and purpling

 

Diamond Tec Windshield Protection Film
- 4mils thick
- protects from road debris, rock chips, pitting
- optically clear
- 99.5% uv rejection
- 10% total solar heat rejection
- 2 year 20,000 mile warranty from bubbling, fading, peeling, and purpling
- We are now an authorized dealer of Prestige Film Technologies and also their exclusive training facility for this product. Dealers interested in becoming certified dealer, please contact Prestige directly as they facilitate this program with us - sales@prestige-films.com

9500Ci Custom Laser Jammer + Radar Detector
- laser jammers' fully integrated into vehicle and not the typical frontal mount where it is very visible.

Satin Guard™
- 8 mils thick
- DualTone Technology that exhibits two different sheens based on lighting conditions
- fully wrapped onto entire vehicle

Diamond Cut IR Nano Tint
- rejects 94% of infrared rays vs. conventional tint at 30%-40% and ceramic tints at 70%-80%
-50% sides + 63% windshield
- Lifetime Warranty from bubbling, fading, peeling, and purpling

 

I'm curious on the cost of just for the windshield and front bumper..

 

Just installed my order of Diamond Fusion Windshield Film today on my Jeep SRT-8/ Got to say it was a little more time consuming to isntall than I thought but it came out great. Looking forward to seeing how well it holds up but have to say its a great product so far. You cant even tell it is on the vehicle.

 

It certainly is a great product. Typical install time is 1.5-2 hrs including removing of trim pieces, wipers, etc. Our company has teamed up with the manufacturer as the authorized training facility for them. For those interested in becoming a dealer, please contact Prestige directly as they will facilitate everything other than the installation training.

 

Nice.