Little project with the Porsche this week.
Thread Starter
|
Registered User
Joined: Feb 2008
Posts: 1,054
From: Northern Virginia
Rep Power: 78
Little project with the Porsche this week.
I have been thinking about purchasing a full exhaust of doing a muffler bypass with high flow cats… the more I think about it, the more I thought about why not just cut the stock exhaust to see just how it would sound.
Kind of wondering if anyone has done this before... did a quick search and foudn nothing. Either way, I have a local guy that will weld the ends up for this week and they will be ready to go back on the car. Each side is pretty light now, light enough that I have already bolted them back up and they will need no hangers.
Very simple to do really and I’m sure the charge for the welding will be inexpensive and it will give off a nice little sound.
Since I had the rear bumper cover off, I went over the rear of the car and cleaned the rear fender wells again. Of course this week, I have spent a total of about 16 hours detailing the car both inside and out, including going though the car’s crevices using about 50 Q-tips.
Kind of wondering if anyone has done this before... did a quick search and foudn nothing. Either way, I have a local guy that will weld the ends up for this week and they will be ready to go back on the car. Each side is pretty light now, light enough that I have already bolted them back up and they will need no hangers.
Very simple to do really and I’m sure the charge for the welding will be inexpensive and it will give off a nice little sound.
Since I had the rear bumper cover off, I went over the rear of the car and cleaned the rear fender wells again. Of course this week, I have spent a total of about 16 hours detailing the car both inside and out, including going though the car’s crevices using about 50 Q-tips.
Last edited by Almo; Feb 17, 2010 at 08:39 PM.
Thread Starter
|
Registered User
Joined: Feb 2008
Posts: 1,054
From: Northern Virginia
Rep Power: 78
I should have them welded and back on the car this Saturday and will get some vids posted.
Thread Starter
|
Registered User
Joined: Feb 2008
Posts: 1,054
From: Northern Virginia
Rep Power: 78
LOL... I'll delay until Friday around midnight to turn key. Do a before/after start up to show before/after plate spill.
Registered User
Joined: Jul 2004
Posts: 2,172
From: Alexandria, VA
Rep Power: 254
Are their house's made from straw or wood
Trending Topics
I had this mod done on my car when I bought it... Previous owner used to do these and sell them thru rennlist... The exhaust was louder than the Fabspeed Gen2 LOUD system I replaced it with. The car would give you a headache in 30 minutes of driving...
Good luck with that one!!
I should have my Xcellerator system from speedtech on in the next week or so. I'll report back!!
Mike
Good luck with that one!!
I should have my Xcellerator system from speedtech on in the next week or so. I'll report back!!
Mike
Thread Starter
|
Registered User
Joined: Feb 2008
Posts: 1,054
From: Northern Virginia
Rep Power: 78
Thanks Mike... I have driven cars on the street that were much louder than this setup would ever be. I think I will be ok and the way I had them welded will make a difference and it will not be that loud.
Cheers,
Allen
Cheers,
Allen
Last edited by Almo; Feb 20, 2010 at 11:16 AM.
Former Vendor
Joined: Jan 2010
Posts: 253
From: Virginia
Rep Power: 0
envy
Allen
Are you having whoooosh envy. Berks car is barking louder now and blowing stronger too. Watch out for the BIG BAD WHOOOOSH!hilar ious
U coming next week?
BTW
Don't **** Claudia off or she will kick our ***.
Are you having whoooosh envy. Berks car is barking louder now and blowing stronger too. Watch out for the BIG BAD WHOOOOSH!
hilar iousU coming next week?
BTW
Don't **** Claudia off or she will kick our ***.
Registered User
Joined: Aug 2008
Posts: 1,017
From: Tampa, FL
Rep Power: 58
I have been thinking about purchasing a full exhaust of doing a muffler bypass with high flow cats… the more I think about it, the more I thought about why not just cut the stock exhaust to see just how it would sound.
Kind of wondering if anyone has done this before... did a quick search and foudn nothing. Either way, I have a local guy that will weld the ends up for this week and they will be ready to go back on the car. Each side is pretty light now, light enough that I have already bolted them back up and they will need no hangers.
Very simple to do really and I’m sure the charge for the welding will be inexpensive and it will give off a nice little sound.
Since I had the rear bumper cover off, I went over the rear of the car and cleaned the rear fender wells again. Of course this week, I have spent a total of about 16 hours detailing the car both inside and out, including going though the car’s crevices using about 50 Q-tips.
Kind of wondering if anyone has done this before... did a quick search and foudn nothing. Either way, I have a local guy that will weld the ends up for this week and they will be ready to go back on the car. Each side is pretty light now, light enough that I have already bolted them back up and they will need no hangers.
Very simple to do really and I’m sure the charge for the welding will be inexpensive and it will give off a nice little sound.
Since I had the rear bumper cover off, I went over the rear of the car and cleaned the rear fender wells again. Of course this week, I have spent a total of about 16 hours detailing the car both inside and out, including going though the car’s crevices using about 50 Q-tips.
