Gorgeous B8.5 S4 in for APR, LLC. Software

 

AB7 RS4 in to upgrade from APR Stage III (TVS1320) to APR Stage III+ (TVS1740) supercharger kit:

 

Mk6 GTI with APR K04 in for an APR Intercooler along with a SPULEN turbo outlet pipe.


[B]

 

Have a DSG equipped VAG car? DSG Software for the DQ250 E and F DSG transmissions is available here at Excelerate Performance. We have been one of the initial privileged few in the world to participate in the Beta program for this software and we are ready and able to flash DSG software immediately. Contact us to set up your appointment to experience all the benefits of software improvements for your transmission.

APR is pleased to present the ultimate transmission control unit (TCU) upgrade for the DQ250 Exx & Fxx DSG and S tronic transmissions! APR’s TCU upgrade is available in engine and power level specific variations and is conveniently flashed to the vehicle’s factory TCU through the OBD-II port. APR’s patented DirectPort Programming Suite allows the end user to customize the TCU upgrade to their individual needs.

APR’s TCU upgrade enhances the driving experience by incorporating many of the same features typically reserved for high-end Audi Quattro GmbH RS models. Under blistering, wide-open throttle acceleration, the transmission shifts even more quickly than before with a higher rev limit. However, during normal, day-to-day driving, the TCU Upgrade delivers a smooth, more refined, driving experience.

Read more on our product page:
http://www.goapr.com/products/tcu_up...0_exx_fxx.html

 

Brand new C7 RS7 4.0TT in for APR, LLC. software. As much as +162 HP and +223 FT-LBS of torque are available through the power band! APR’s ECU Upgrade is the best power per dollar modification for the new 4.0 TFSI V8 and gives it just the extra edge these cars lack from the factory without pushing the limits.

 

Mk5 GTI in for a BillyBoat full turbo back exhaust.

 

Another loyal customer with a B7 RS4 came to us for upgraded rotors and pads. The logical choice was StopTech 2 piece drilled Aero rotors and STOPTECH performance pads.



A front shot of these Bilstein sport shocks with VWR springs that we installed on a Mk5 R32 3.2 VR6.

 

AWE S-Flo intakes for the 4.0TT S6 and S7 coming soon. 2012+ Audi S6 and 2013+ Audi S7 enthusiasts, something carbon is coming. Ready to unlock your 4.0T? Stay in the loop, here: http://goo.gl/dup5Jf

 

What would you do with two APR Supercharged R8s? These guys thought doing burn outs was a good choice.

 

This very clean MK1 TT 1.8T 225 Quattro Convertible came in for APR, LLC. software, fresh plugs and coil packs and some repair work.

 

EXCELERATE PERFORMANCE proudly announces that we are now the Northeast Master Distributor for the RECARO automotive lineup.



For decades, RECARO Automotive Seating has been setting standards in seats for passengers cars. Manufacturers such as Aston Martin, BMW, Ford, Lamborghini, Mercedes-AMG and the VW Group value this premium quality and offer RECARO seats as a factory equipped, standard or optional feature. There are also many drivers who retrofit their cars with RECARO seats. And this is where we come in. Excelerate Performance, has secured a distribution arrangement with RECARO North America to serve the Northeast primarily, as well as other areas of the US for retail consumers. We are working diligently to provide a consummate experience for anyone who is interested in RECARO seating. And since many of the larger distribution warehouses and online shops can no longer carry RECARO seating, we are happy to fill the need and serve our customers, locally and online.

So what makes RECARO the best seat on the market? All of their seating concepts for the present and future combine the following features:

Ingenious Design
Ergonomic comfort
Excellent safety
Innovative craftsmanship

RECARO Automotive Seating: THE RIGHT SEAT FOR PASSENGER CARS, MOTORSPORTS AND TRUCKS. Below are just a few options available from RECARO and Excelerate Performance:

Street and Comfort:

RECARO Expert



RECARO Specialist



RECARO Sportster CS Cross



RECARO Sport



RECARO Motorsport:

RECARO Pro Racer HANS Ultima 1.0



RECARO Child Seat:

RECARO Euro



Whichever RECARO seat interests you, please let us know and we will be happy to properly fit you the seat that is best for you. Within the next few weeks we will have display seats and material in our showroom. Please feel free to contact us via phone, email, or message on a RECARO setup of your choice. Also if you'd like to purchase RECARO online please use the following link: http://vag.excelerateperformance.com...o/b-10123.aspx

For additional info on RECARO Automotive seats: https://www.recaro-automotive.com/us/home.html

 

If you didn't get a chance to see the XL.R8 4.2 FSI at Waterfest here was a beautiful shot taken by APR and used by ADV.1 as well. And if you want to see more check out the following info:

Excelerate Performance presents the XL.R8 Project, which includes a progression of our 08 R8 4.2 FSI build, including the APR, LLC. Stage 3+ supercharger system, ADV.1 Wheels 5.2 Track Spec SL wheels, and Milltek Sport exhaust. Click on the link below for more details and images.

http://www.audizine.com/forum/showth...illtek-Project.

 

Excelerate Performance is excited to announce our ability to provide Avant Garde wheels to the Audizine Community!!! We have recently established a great relationship with Avant Garde after having a few of our customers come in with Avant Garde wheels on their car. We instantly recognized the beautiful craftsmanship and attention to detail that Avant Garde puts in to their product and knew right away that this was a product we wanted to provide. We have already sold a few sets and could not be happier. Without further adieu, Avant Garde!







Avant Garde
( ävänt-gärd )

noun

Originally used to describe the front line of an advancing army, the term avant-garde is now applied to any group that represents the innovative and those who are ahead of the majority.

With this core philosophy, Avant Garde Wheels pushes the boundaries beyond what is accepted as the status quo in the wheel industry as a manufacturer of superior quality wheels with performance driven engineering in mind. Realizing that even the best looking wheel can be ruined with improper sizing, we engineer our wheels with proper fitments from the beginning. At Avant Garde, we are passionate not only about the quality of our wheels, but how they are going to look on your vehicle.

UNPARALLELED QUALITY

In order to maintain the highest quality possible, Avant Garde utilizes the latest in computer aided engineering and testing when it comes to the creation of all of our wheels. By utilizing Finite Element Analysis (FEA), we are able to perform detailed testing methods which ensure the strength and durability of our wheels. FEA allows for detailed visualizations of where a wheel can bend or twist and indicates the distribution of stresses and displacements. This allows for entire designs to be constructed, refined, and optimized before any manufacturing occurs. To ensure we never compromise on quality, each of our designs complies with the stringent testing of the industry recognized JWL standard. For detection of even the most minute flaws, our wheels are put under pressure in a specially designed water tank and scanned for hidden flaws by X-ray. This entire process ensures we provide the highest quality product to our customers.

EXCEPTIONAL FIT

As a result of our unique manufacturing abilities, Avant Garde is able to produce vehicle specific fitments designed to fit each application as aggressively as possible without compromising on style. Every Avant Garde wheel is produced with specific vehicles in mind in order to cater to the various niche markets from around the industry. We were the first company to introduce 19x9.5/19x11 hub centric fitments for the BMW E90/E92/E93 M3s as well as the Nissan 350z/370z. Our entire Ruger line is engineered specifically for Porsche vehicle fitment. Aggressive, yet functional fitment is our goal in order to make each of our wheels look as attractive as possible on your vehicle.

DRIVEN BY PASSION

With over 40 years of experience in the automotive wheel industry, all of us at Avant Garde understand the level of attention to detail that should be required from everyone in this industry. Unfortunately, not all companies are fortunate enough to be managed and run by fellow automotive enthusiasts. Thankfully, our passion for engineering the best possible wheels can easily be recognized through the quality and finish of all of our products. Our passion for our own vehicles is reflected into the company and extends to our sales team, marketing department, and warehouse staff. Here at Avant Garde, we are fueled by enthusiasts and driven by passion.

Here's some of the wheel options Avant Garde offers:




Bespoke:
For those few who seek genuine exclusivity. Avant Garde Bespoke is a new program catered to those who demand a tailored wheel customized to the their specifications.

PUSH THE BOUNDARIES
We pride ourselves on producing vehicle specific fitments engineered to fit as aggressively as possible without compromising performance. Now with the ability to produce custom bolt patterns and custom offsets, Avant Garde Bespoke provides each driver with their own perfect balance between form and function.

MAKE A STATEMENT
Finish is more than just another decision. It evokes emotion. It reveals personality. It makes a statement. Whether you choose from the plethora of powder coat colors or go with a multi-stage finishing process involving brushing and polishing, the Bespoke program allows each person to create something truly unique.


Here's a look at some Audi's that have been outfitted with Avant Garde wheels!!!




Wheels - Avant Garde Wheels - AG Function - AG Form

For any and all info, please shoot us a PM, email us (Sales@ExceleratePerformance.com), call us at 2034836100, or comment on this thread and we will be more than happy to put together a wheel package for you!

 

Disassembly of the R8 GT 5.2 V10 in preparation for the Tubi exhaust and APR, LLC. software.




Despite the R8 GT boasting lighter weight, the stock exhaust was still almost 67 lbs. The Tubi was closer to about 30 lbs. In order to prevent any damage due to exhaust temps, the factory heat shields are reinstalled over the Tubi exhaust.



APR, LLC. completed the R8 GT V10 5.2 project by providing software for the dual ME9 ECU's and increasing hp to almost 590 total hp!!!

 

Our very first Mk7 GTI in for APR, LLC. software. With gains of 115 TQ and 90 HP it's a no-brainer. And it's all done through a direct port flash in about 20 minutes.



Another MK6 GTI in for the APR, LLC.K04 kit for the 2.0L TSI with the upgraded 3 Bar MAP sensor. This is probably one of the best bang for the buck upgrades for this platform.

[/QUOTE]