Excelerate Performance: Northeast Audi & VW Performance and Service Center
Former Vendor
Joined: Nov 2014
Posts: 334
From: Branford, CT
Rep Power: 0
YES, we do Ferrari too. This Ferrrari F360 Modena was towed in after the owner heard a "pop". After some diagnosis, it appears to be a camshaft failure. Check back in for updates on this repair.
Former Vendor
Joined: Nov 2014
Posts: 334
From: Branford, CT
Rep Power: 0
It's a challenge to develop an aftermarket exhaust for the great 911. The Akrapovič engineers have prepared a superb system with a dual nature. When the valves are closed, the 911 sounds deeper than stock, but not louder. When the valves are open, expect a completely opposite, pure racing sound, with adrenaline-pumping bangs.
With perfect fitment and no drone, combined with an amazing sound, what more could you ask for?
The noise-control exhaust valves help reduce excess drone. At high rpm the valves open to allow the exhaust to breathe and produce the definitive sound of an Akrapovic Exhaust System.
This wireless receiver allows the driver to open and close the exhaust valves remotely.
By using the optional Wireless Kit, the driver can fully control the exhaust valves, which are controlled by the car’s electronics if no optional part is used. When the valves are closed, the 911 sounds deeper than stock, but not louder. When the valves are open, expect a completely opposite, pure racing sound, with adrenaline-pumping bangs.
Former Vendor
Joined: Nov 2014
Posts: 334
From: Branford, CT
Rep Power: 0
We already posted up one Akrapovic Exhaust System earlier on a Porsche Targa, and now a MK6 GTI. We also fitted front and rear APR Tuning sway bars, carbonio intake, and did a stage 1+ direct port flash.
Former Vendor
Joined: Nov 2014
Posts: 334
From: Branford, CT
Rep Power: 0
We've had a few different cars in the shop the past couple days including a 2014 Audi RS7 and a 2001 Porsche 911. The Porsche received a new alternator as well as important maintenance work, while the RS7 had the latest APR Tuning software installed.
Former Vendor
Joined: Nov 2014
Posts: 334
From: Branford, CT
Rep Power: 0
This B7 RS4 came all the way from Canada for carbon cleaning, a Forge Motorsport oil cooler setup, StopTech 2 piece zinc coated slotted Aero Rotors as well as important maintenance services.
Former Vendor
Joined: Nov 2014
Posts: 334
From: Branford, CT
Rep Power: 0
The 991 Porsche Turbo S returned for some slight fabrication work. The AWE Tuning black quad tips were pulled out even further to give it a more aggressive look. Keep your eye out for some GIAC software upgrades in the future.
[/QUOTE]
Former Vendor
Joined: Nov 2014
Posts: 334
From: Branford, CT
Rep Power: 0
Excelerate Performance has upgraded its capabilities and expanded its services. With our new Hunter Engineering Auto34 Tire Mounting machine and Hunter Road Force Touch Balancer, we are now capable of handling the most complex of wheel and tire combinations. Contact our service team for more information and pricing.
