6speedonline's official 1/4 Mile, 60-130, 100-150 and Standing Mile thread - Page 105 - 6SpeedOnline

Jan 24, 2017 | 08:42 AM

#1561

Mark @ AIM Performance

Basic Sponsor

Joined: Dec 2009

Posts: 6,584

From: S.Plainfield, NJ

Rep Power: 856

Quote:

Originally Posted by K24F

Yes manual tranny, I did this run (confirmed with a second back to back) in 4rth gear only because no grip enough in 3rd, even in 4rth I had little spinning around 5000rpm. (MPSC2)
Nevertheless my times are usually equal in 3rd+4rth vs in 4rth only, I guess because relatively small turbos.
How much power would you guesstimate?

it looks like the Turbos come on full tilt right around 60mph based on the graph so you are really about as good as its going to get at this boost level I think. my guess would be 925whp. turn it up another 4 pounds and might see 3.x

__________________
#TeamAIM
997TT SilverSpool - 210.8 mph 1/2 Mile WR Apr 2019, 9.2 @ 168 mph 1/4 Mile Manual World Record , 3.15 60-130 mph , 2.72 100-150 mph , 1400whp E85
996TT SpoolBus - 204.6 mph 1/2 Mile 996TT WR Aug 2018, 9.5 @ 154 mph, 3.23 60-130 mph, 2.5 100-150 mph Manual Porsche World Record, 1400whp E85
997TT SlowBerry - 205.0 mph 1/2 Mile WR Nov 2018, 9.7 @ 170 mph 1/4 Mile , 3.2 60-130 mph , 2.4 100-150 mph , 1420whp E85
ESMOTOR | DO88 | TPC DSC | SYVECS | COBB | IPD | KLINE | XONA | AMS | ID | ERP | SACHS | TURBOSMART | CSF | DODSON |

Jan 24, 2017 | 09:12 AM

#1562

K24F

Registered User

Joined: Nov 2008

Posts: 833

From: France

Rep Power: 85

Quote:

Originally Posted by prodigymb

yes I agree, the boost reaches 20psi about 4000rpm and 24psi about 4700 to the end, very nice street powerband.
I believe this pretty nice time is achieved more with the torque than with the power.
925whp means 1050crankhp if I'm right?

All is perfect for now so I prefer no raising anymore, I'm European so I already do 3.x at the 100-200!

(and 10mm studs only, already poor grip, poor E85 in winter, etc...)
thxs, P.

Jan 24, 2017 | 10:24 AM

#1563

Markblackwell

Registered User

Joined: Nov 2014

Posts: 922

Rep Power: 149

60-130 submission

Mark,
I just emailed you the DBN file of my 5.33 60-130 run this was my ByDesign stage 4 it was run in the middle of summer at around 8 am and look at that slope flatter than most 1/4 mile tracks.

Jan 24, 2017 | 10:24 AM

#1564

Mark @ AIM Performance

Basic Sponsor

Joined: Dec 2009

Posts: 6,584

From: S.Plainfield, NJ

Rep Power: 856

Quote:

Originally Posted by Markblackwell

https://www.6speedonline.com/forums/...stage-4-a.html

Mark here is my post for my 60-130mph run 5.33 seconds I cant find my SD card or I would send that file over but attached is where I posted it.

Mark Blackwell/By Design stage 4

Thanks for submitting the DBN file. Your 5.33s 60-130 has been verified.

Last edited by Mark @ AIM Performance; Jan 24, 2017 at 10:33 AM.

Jan 24, 2017 | 03:32 PM

#1565

PencilGeek

Registered User

Joined: Nov 2009

Posts: 95

From: Morgan Hill, CA

Rep Power: 22

Quote:

Originally Posted by K24F

How much power would you guesstimate?

You can submit your file to vbox dyno to get a power estimate.

Last edited by Mark @ AIM Performance; Jan 25, 2017 at 01:39 PM. Reason: outside links

Jan 25, 2017 | 01:43 PM

#1566

Mark @ AIM Performance

Basic Sponsor

Joined: Dec 2009

Posts: 6,584

From: S.Plainfield, NJ

Rep Power: 856

Quote:

Originally Posted by mcoupe mus

Email sent for 1/2 mile

your 202.9mph half mile vbox run is verified ! congratulations !

202.9 - Mcoupe mus / 997TT / AWD / PTE6870s / Syvecs / 1250+ WHP / Sequential

Jan 25, 2017 | 02:23 PM

#1567

Markblackwell

Registered User

Joined: Nov 2014

Posts: 922

Rep Power: 149

Quote:

Originally Posted by mcoupe mus

Email sent for 1/2 mile

Congrats brother thats is awesome at 115mph your still pulling over 1G!

Feb 1, 2017 | 06:21 AM

#1568

ysfg35

Registered User

Joined: Aug 2009

Posts: 1,745

From: KUWAIT

Rep Power: 170

Hey mark ,thanks for adding my results

the car has es1200 boosting 2.2bar because of fuel limitation .. the car was making 1053whp not 1200whp !!!

Feb 1, 2017 | 09:22 AM

#1569

Mark @ AIM Performance

Basic Sponsor

Joined: Dec 2009

Posts: 6,584

From: S.Plainfield, NJ

Rep Power: 856

Quote:

Originally Posted by ysfg35

Hey mark ,thanks for adding my results

the car has es1200 boosting 2.2bar because of fuel limitation .. the car was making 1053whp not 1200whp !!!

sorry I assumed with 6466 turbos the 1200 in ES1200 was the whp of the car.

Feb 6, 2017 | 08:13 AM

#1570

Mark @ AIM Performance

Basic Sponsor

Joined: Dec 2009

Posts: 6,584

From: S.Plainfield, NJ

Rep Power: 856

mcoupe mus slightly improved his ES750 991 60-130 to 5.3s

Mar 3, 2017 | 02:14 PM

#1571

Mark @ AIM Performance

Basic Sponsor

Joined: Dec 2009

Posts: 6,584

From: S.Plainfield, NJ

Rep Power: 856

Congrats EK and Emre on running 8.0@188 and also at improving their 60-130 and 100-150 times in the white 2k HP GT2 !

Mar 3, 2017 | 02:33 PM

#1572

Mark @ AIM Performance

Basic Sponsor

Joined: Dec 2009

Posts: 6,584

From: S.Plainfield, NJ

Rep Power: 856

Emre also submitted a 1/2 mile 219.6 mph run from a very cool project 991 with Metzger swap and his ES2k kit.

Mar 16, 2017 | 12:09 PM

#1573

Mark @ AIM Performance

Basic Sponsor

Joined: Dec 2009

Posts: 6,584

From: S.Plainfield, NJ

Rep Power: 856

iLoX submitted some data from his ESMOTOR 997.2 on stock turbos.

very impressive 6.18 60-130 as well as a 100-150 and standing 1/2 mile and 1 mile data.

Congratulations iLoX.

Mar 21, 2017 | 12:43 PM

#1574

99Gdzra

Registered User

Joined: Aug 2016

Posts: 529

Rep Power: 58

Ran my new personal best in the car last Friday night... car has AMS I/C's, Catted Europipe, and Cobb tune for 93 pump gas. Also, running on MPSS's 245/30/20" fronts and 325/25/20" rears. DA at time of my pass was 2249' and fairly high humidity... I think there's a 1/10th or so left in the car before I switch to better tires. I'm car 130 on the time slip submitted.