930 intercooler, exhaust, and intake question
#1
930 intercooler, exhaust, and intake question
As with most 930 owners, I have the itch to add a few mods to my car. I am looking for an intercooler, headers, muffler, air intake, etc and was hoping someone could point me in the right direction. I keep coming back to Fabspeed, but I am not biting as of yet. I also have a question as to the wastegate. Is this something I should also look at replacing and if so, any suggestions?
Thanks in advance, J
Thanks in advance, J
#2
As with most 930 owners, I have the itch to add a few mods to my car. I am looking for an intercooler, headers, muffler, air intake, etc and was hoping someone could point me in the right direction. I keep coming back to Fabspeed, but I am not biting as of yet. I also have a question as to the wastegate. Is this something I should also look at replacing and if so, any suggestions?
Thanks in advance, J
Thanks in advance, J
http://www.rarelyl8.com/index.html
http://www.turbokraft.com/catalog/index.php
Last edited by GT3 Chuck; 11-22-2011 at 10:32 PM. Reason: active link to a commercial non-sponsor
#4
Leadslinger and 9eleven we have all products in stock for your 930's. Our mufflers will fit the stock turbo and the K27 if you have that installed, here's a video of our '87 Slant with the products installed:
http://www.youtube.com/user/Fabspeed...13/fPg92WBcy-8
#5
Captain, that center outlet is going to be bad assss. Are you just going to run a straight pipe directly from the turbo? The Muffler you had pictured allows for a passenger side dump. The Zork Tube we offer allows for a center dump below the stock valence, but since you already have the piece cut, the Zork might work best and you can customize tips to fit.
Leadslinger and 9eleven we have all products in stock for your 930's. Our mufflers will fit the stock turbo and the K27 if you have that installed, here's a video of our '87 Slant with the products installed:
http://www.youtube.com/user/Fabspeed...13/fPg92WBcy-8
Leadslinger and 9eleven we have all products in stock for your 930's. Our mufflers will fit the stock turbo and the K27 if you have that installed, here's a video of our '87 Slant with the products installed:
http://www.youtube.com/user/Fabspeed...13/fPg92WBcy-8
#6
Wow! That looks sick! What turbo are you using and why are there 2 wastegates? Is that because of the exhaust? How much horsepower do you think you are producing at the crank?
Last edited by 9Eleven; 11-23-2011 at 04:13 PM.
#7
I decided to go with the Garrett GT3582R twin scroll matched with true split headers, so 2 waste gates are needed...one for each bank.
Shooting for 500 at the wheels
Trending Topics
#9
https://www.6speedonline.com/forums/...version-9.html
#10
Happy Thanksgiving all. Not sure I am ready for a CaptainCalf conversion just yet or at least I know my pocketbook couldn't handle it. I don't plan on tracking my car either, just a well respected performance street car. I have looked at Fabspeed, Rarelyl8, and Turbokraft. Not sure if I want to go with one shop for all my parts or mix it up. I like Fabspeeds dual tip dual out muffler setup, but am pretty open to the remaining components. 9Eleven, we will have to get together. I was hoping to head up to Fabspeed sometime next spring or so as it is a short drive for me and a good reason to get the car out. I am sure Joey and Alex wouldn't mind the business.
#11
FS stuff is good, also check out the rarely8 IC, love the way it bolts right on preserving the stock recirc system.
I have exhaust, 1 bar spring and andial IC. I might go with a k27 later. That's about it....
I have exhaust, 1 bar spring and andial IC. I might go with a k27 later. That's about it....
#12
TT Surgeon, did you end up changing out your wastegate all together or did you just replace the spring to a 1 bar? I am fairly sold on Fabspeed, but am biding my time before I drop $6K on a intercooler, headers, dual out/dual tip muffler, and air intake. Not sure if I should keep the stock wastegate or go with a new Tial. I also have a black slant which I want to keep pretty simple. Thanks Chris, Jason
#14
Something I have discovered after owning the car for 10yrs. It was a track car so it came with the old Garretson IC, probably a K27, with a new at the time wastegate, headers, and a lowered and modified suspension (that just does not scrape in normal circumstances)when I had it rebuilt Prototech built a stainless muffler with a 4 inch single outlet, but , it looks like the Fabspeed and I just put on the cold air induction kit from Fabspeed. The car is very fast..no matter who tries it does not get beat and in most cases no one tries. i have rejected EFI since then it is becoming something that never was.. same thing with the bigger wheels and tires--the stock setup is a blast to drive and very nimble..just keep replacing the tires if you can find new ones. I vote for slight mods and big enjoyment... just my 2cents
#15
Going through the same thing myself. Nothing is installed onto my car yet, so I can't give a review. Intercooler, I went TurboKraft. Air Intake, I went with Gruppe M. Exhaust System, I went B&B. Wastegate, TiAL 1 Bar. Suspension, Elephant Racing Bilstein Sport. Turbocharger, Garrett GT35R. Feel free to give me ideas too!!! Thanks!