not sure which one to go with. AEM or Aquamist hsf 1? i like all the safety features aquamist offers but do i really need all that? as long as i have the low level indicator, i should be fine but the price is also an issue. AEM does not have all the features aquamist has but is it worth all that?

 

Aquamist HSF3.

 

without ecu based failsafes(don't know as much about the porsche ecu as other ecu's) and if there is the availability of e85, I would say no meth injection. That's for another thread though, but if you must aquamist from the UK is king.

 

After doing some research I am planning on doing the Aquamist HFS6

 

The new Perrin kit should also be very good.

http://www.perrinperformance.com/pro...tem?category=4

 

Unless you track your car ALOT, you can use the 3 and achieve the same results.

 

what is the difference between the HSF 3 vs 6? larger tank??

 

What if a line bursts? or gets melted because of a bad install? or anything OTHER than low level? ...melted engine, thats what...for a couple bucks. (Aquamist also has a flow meter) Detonation will kill your engine faster than that tank will drain down so your low level indicator will shut it off. Do yourself a huge favor and just buy an Aquamist kit. Better to have too much than not enough...Mine has been installed for way over a year and I haven't touched it and it works MINT!!!

 

Can one use 100% meth with the aquamist hfs3 kit? everyone I know uses it for cooling 50/50 mix.

 

I have an older HFS-1 kit and have ONLY sprayed 100% VP M1 meth through it, except for a few 50/50 dyno pulls.

 

I have used both AEM and Aquamist with good results. If you are interested, I have my old AEM kit FS, PM me.

 

Strange. E85 is good to about two bar. We are running a lot more than two bar with E85 and we need Aquamist with the E85.

 

I'm in a search for the best and most safe straight Methanol kit, i just uninstalled my AEM kit which fail after using straight methanol

 

Aquamist HSF.