I wanted to start off by Thanking everyone here for the Support and encouragement over the last 2 years trying to get the car driveable and ready.
Its been a long slow and PITA process to say the least.

As you all know i started off Building the motor after it developed Bent rods.

The car now has a M.1000
fully built 3.8 motor
GT3 cams
GT3 ported heads and a Stock 996 Intake ported to match the heads
HTA3586 turbos
Markski - headers, Intercoolers, and 3" exhaust
E85 fuel system and fuel set up- ID2000's, twin 044 in-tanks feeding a Surge tank and a Weldon delivering the fuel to the Motor.
Trans with rebuilt with a Guard 3 piece main shaft with the following gears 1st-3.154(13:41) 2nd 2.375(16:38) 3/4 1.750(20:35) 5/6 1.308(26:34)

Guard also made up a LSD for the car so it tracks straight.
Installed 18" HRE R40 rims to keep the rating mass down.
DSS axles in the rear - RWD conversion.
Red top Optima battery - installing my carbon Braille for the event day.
installing the Status carbon seats to replace the Sport seats.

Magnus set up the Syvecs with his own tune- still working on that but its a very clean tune up to 7800rpm

Performance data really nothing to show Did a 60-130 yesterday during the day 18 psi car felt very good - it was Hot and Humid but still ran in the 5's
Car made 881 at 23psi on the Dyno not looking to break dyno numbers in any sense just a very good conservative tune.

So Predictions on what it will do...????? I have an event im doing this Saturday the 24th - Race the Runway

 

Congrats on your project completion..
Good Luck,,I hope you will be more then satisfied with your results there..

 

Wow congratulations on your project! That car is going to be a beast. Can't wait to hear what kind of numbers it puts down.

 

156mph

seriously, you should easily run 190+.

 

Glad to hear your car is out of the shop! Where is this event.. at Downsview?

BHT says 190+ but the airs a little thicker up here.. so my guess is high 180s...

 

Congratulations the project!! You'll have to post a video after the event. 194 is my guess Good luck and keep us posted.

 

Todd im happy with anything over 175 honestly

Downsview I WISH!!! i have to cut the chain link fence to run there! LOL

no Smith Falls - www.racetherunway.com

 

Good luck and congratulations!! I know first hand how these projects can get.
I say 180 mph...Enjoy!!

 

Thanks!! im sure you do.

When we renovating your restaurants???

 

they actually have a Mobile app called Race the Runway to track the speed runs. My car is #311

https://itunes.apple.com/ca/app/race...675627860?mt=8

 

congrats on the build! did you get the slave assist installed? im running next month at a half mile event and will be pleased to see 160m[ph . cant imagine 180!! safety equipment besides the seats?

 

I have the 6 point roll bar and a extinguisher. they said Helmets are mandatory which i have and i have my neck brace gloves and jacket.

 

nice. try the cg lock for the seat belt. im installing a 6 point harness setup in mine . after tons of research i found getting the mounting points for the eyelets to be the hardest part. twin 3/8" steel plate sandwiching the floorpan to secure the eyebolts

 

Finally got a new fan!! Need to cool this beast down

 

Interesting to see the fan. What are specs? higher CFM than stock?