Anyone using the AEM Infinity?
Registered User
Joined: May 2015
Posts: 2
Rep Power: 0
Yes. I checked the pinouts and it looks to be the same for both 996/997. Just wire the 997 to the same wire and you should be good to go. I was curious about the 997 turbos on a 996 and checked that the pinout for the 996 are not used so you could just wire the 997 turbos actuators to the free pinouts on the harness and just turn them to operate in the AEM.
The Uprights however will not work with the AEM unit. It is pulling the wheel speed data directly from the CAN system so it has no control over what it is sending out or receiving. So basically if you cant get it to work with the factory ABS CAN system than the AEM will not see it.
Registered User
Joined: May 2015
Posts: 2
Rep Power: 0
Nope just wire the inputs and outputs in like the 997 and activate it through the tables.
Thread
Thread Starter
Forum
Replies
Last Post
turbotuner20v
Automobiles For Sale
20
Sep 11, 2015 12:02 PM
Velgen
Other Japanese Supercars
0
Sep 3, 2015 12:28 PM