32hp and 22ftlbs Gained - My New Project
Could you p.m. a tracking number?
boxing up and shipping out 
if you are interested in one, go here -
http://www.vividracing.com/catalog/p...ducts_id/45355
if you are interested in one, go here - http://www.vividracing.com/catalog/p...ducts_id/45355
Registered User
Joined: Oct 2007
Posts: 161
From: SF Bay Area
Rep Power: 25
I know that a/f ratios can become a problem in other turbo cars, especially tuned ones, when an intake is introduced.
Have you measured, and/or will the ECU compensate?
Have you measured, and/or will the ECU compensate?
Last edited by jt2; Oct 6, 2007 at 10:35 AM.
Member
Joined: Apr 2005
Posts: 1,932
From: The Woodlands, TX
Rep Power: 107
The ECU compensates. The MAF sensor and 4 O2 sensors provide the data and the Motronic adjusts accordingly, whether stock or tuned.
Registered User
Joined: Jul 2007
Posts: 380
From: Malibu California
Rep Power: 35
Got my Airbox yesterday and went down to put it in. Everything look sweet, it's a easy install except for the "childproof" screws on the MAF. I'll get the tool tomorrow and post a DIY in the next day or two.
Zuma.... glad to hear. half the tools are so weird huh!
Give me a buzz before you post your DIY as I want to work with you on an official release if you are interested?
Give me a buzz before you post your DIY as I want to work with you on an official release if you are interested?
Registered User
Joined: Jul 2007
Posts: 380
From: Malibu California
Rep Power: 35
Will do. I'd a had it done had I not mis-placed my 6 lobe...but I'm doing a few other things at the sametime, so it's not a biggie. I'll shout you out in a couple days. Tom
Registered User
Joined: Jul 2003
Posts: 1,293
From: Northeast US
Rep Power: 82
Tom,
If you are in a rush, you can clamp those screws with small vice grips (they have a high profile side - enough to grab) and spin them out. I did that with my V-Flow when I first got it.
If you are in a rush, you can clamp those screws with small vice grips (they have a high profile side - enough to grab) and spin them out. I did that with my V-Flow when I first got it.