Cheapest Mod with highest result.. 10 to 15 HP
Thread Starter
|
Registered User
Joined: Dec 2005
Posts: 87
From: So Cal
Rep Power: 24
Porsche CHP ..Cheap Horse Power..
I have to say this is probably one of my best hobby. Now that I see what the initial result produces, I can refine this device to give me what I'm looking for. My goal is to obtain noticable boost gain between 3500RPM to 5000RPM range and raise the torque @ around 3000RMP at the same time smooth out the peak HP gain between 6-7K RPM. If we look closely at the graph we can see that the gain can be as much as 25+HP @ around 6400 RMP but very unstable. Back to the drawing board guys, STAY TUNE for more updates.
Thread Starter
|
Registered User
Joined: Dec 2005
Posts: 87
From: So Cal
Rep Power: 24
Porsche CHP ..Cheap Horse Power..
Downloaded the viewer app to explore more about this DYNOJET runfile.drf file that was done earlier today. RUNFILE_002 is the stock and RUNFILE_004 is with the mod. Here's what can be seen closely.. Very interesting. My Correction Factor is SAE and SMOOTHING is set to 3.
And this is what was given to me by SWANSONPERFORMANCE without any reference gain point. Being new to this I learned alot from reading and understanding these graphs.
So by looking at these graphs MAX HP gain is not the same as MAX PEAK HP gain, two diffrent perspective. My MAX gain is 21HP where as MAX PEAK gain is almost 10HP.
And this is what was given to me by SWANSONPERFORMANCE without any reference gain point. Being new to this I learned alot from reading and understanding these graphs.
So by looking at these graphs MAX HP gain is not the same as MAX PEAK HP gain, two diffrent perspective. My MAX gain is 21HP where as MAX PEAK gain is almost 10HP.
Last edited by xdream; May 5, 2007 at 06:31 PM.
Registered User
Joined: Apr 2007
Posts: 237
From: NE Florida
Rep Power: 32
xdream, one thing I applaud you on is, you don't jump to conclusions and make impulsive claims.
No doubt it's a hobby, but I can see you take pride in your work, and want to perfect it, and make your claims honorable.
Good Luck to you on your project, and I hope others get to benefit from it.
No doubt it's a hobby, but I can see you take pride in your work, and want to perfect it, and make your claims honorable.
Good Luck to you on your project, and I hope others get to benefit from it.
Thread Starter
|
Registered User
Joined: Dec 2005
Posts: 87
From: So Cal
Rep Power: 24
Porsche CHP ..Cheap Horse Power..
Originally Posted by 3deep
So if this idea works how long before you put it into production.Assuming all goes well with the dyno,when will you have enough product to ship.
