I have stock turbo wheels and i have the oem 5 mm spacers, with long bolts that i had on my 997 c2. will these work on the stock turbo wheels. i am not clear with the tech equipment notes for the spacers for turbo stock wheel application. or do i have to use 5 in front and 17 in rear.

i have seen post where people have different sizes, need advice if i can reuse the oem spacers or sell them

 

vow 55 views and no response

 

do the bolts say "GT" on them? If so then yes (GT3, GT2, RS etc..).

 

thanks i will check the bolts, but my question really is will 5 mm on all four corners ok on stock turbo wheels

 

On stock ride height? Should still be fine 5mm is very small.

 

ok sharkster

the bolts do say gt on them. ( i have a turbo though) it was a 5mm kit i bought from porsche. so i wont have any issues with these on the stock turbo wheels/pccb then?
oh i will be lowering the car by ~ 20 mm

thanks again

 

Hi Ronnie,

No that's perfect.. The bolts are the longer ones (with GT on them) and especially if you are lowering the car you'll be great with those and the 5mm spacer kit.

 

great, i guess i dont have to sell my spacer kit . may i ask why it would be bettter with the spacers especially if i am lowering the car? i am assuming the wheels get tucked in when you lower it?

 

No, you will be fine with that setup.