Hi
Please advice good obd2 device and soft for iOS.(or may be gauge all in one) Planing to use on a track. Most wanted features are


EOT (Engine Oil Temperature) °F or °C

IAT (Intake Air Temperature) °F or °C

AFR (A/F Ratio)

EGT (Exhaust Gas Temperature) °F or °C

OIL (Oil Pressure) kPa or psi

FRP (Fuel Rail Pressure) kPa or psi

BP (Boost Pressure) kPa or psi

Thanks in advance

 

Would this work??

http://iobd2.co.uk/

 

One of the guys at the track, Pwdrhound, turned me on to this gauge this summer. It works great and is slightly larger than an iPhone.

http://www.brockwayengineering.com/dgauge.html

Currently they are out of stock but production should resume in the next several months when a new screen supplier can be sourced. Perhaps you can find a used one which is what I did.

Obviously you can have it "custom installed" or you can go for a $25 solution. Just stick a strip of Velcro on the grippers and unit and then attach the device in your CD slot.


Let me know if you have questions. Best,

 

Why do you find dgauge better then obd2 wifi and iphone app? What's the difference?

 

I don't know that it is. It's just what I use. I had not seen the iPhone app until this thread was posted. It would be good to hear from actual users and get some more details on it. It could be a very nice solution. Best,

 

this is what I use...

Kiwi wifi OBDII
http://www.plxdevices.com/product_info.php?id=GSSTWIFI

Emprum Ultimate GPS (10hz)
https://www.emprum.com/ultimategps.php (I also use an extender cable)

Harry's laptimer for iPhone (the guy who makes it has a Porsche, lives in Germany, and is both a genius and a gentleman):
http://www.gps-laptimer.de/Home.html

Don't know off the bat if Harry's will collect all the details you want, though.

 

What soft do you use?

 

I use it also, and there is no such data

I think the question should be- what software to use, now?

 

Today I've tried IOBD2 and I was disappointed =(
Couldn't find
EOT (Engine Oil Temperature) °F or °C
AFR (A/F Ratio)
OIL (Oil Pressure) kPa or psi

and the frequency of changing info is TOO low =(
rpm is 2000 and it shows 800 >>>

 

 

no answers?