EVOMs Coil Packs...
Can anyone give the Part number for the rubber stub from the coil to the plug? A bosch part number would be best if available.
Also, if anyone has the 'official' part number from the coils, It would be great just in case I'm mistaken in my search for another coil to replace the broken electrical connection. (or i may just place that one in a easy to reach location
)
Also, if anyone has the 'official' part number from the coils, It would be great just in case I'm mistaken in my search for another coil to replace the broken electrical connection. (or i may just place that one in a easy to reach location
)Coil P50
Order number 0 221 504 001
Honestly hard to say, as we haven't had many people need replacement parts from their first set so we don't have a large knowledge base of 'common' failures. They're similar in construction to the stock coils, so I'll say they should not be any better or worse regarding cold weather durability.
__________________
Evolution MotorSports | www.evoms.com
EVOMSit - intelligent tuning |www.evomsit.com
P: 480.317.9911
F: 480.317.9901
E: info@evoms.com
Home of the Worlds Fastest 997TT Porsche(s)
997TT Standing Mile = 234.6 MPH
997TT Standing 1/2 Mile = 217.09 MPH
Fastest 1/4 Mile = 9.29 @ 172.7 MPH
60-130 MPH Time = 3.28 Seconds
Evolution MotorSports | www.evoms.com
EVOMSit - intelligent tuning |www.evomsit.com
P: 480.317.9911
F: 480.317.9901
E: info@evoms.com
Home of the Worlds Fastest 997TT Porsche(s)
997TT Standing Mile = 234.6 MPH
997TT Standing 1/2 Mile = 217.09 MPH
Fastest 1/4 Mile = 9.29 @ 172.7 MPH
60-130 MPH Time = 3.28 Seconds
Honestly hard to say, as we haven't had many people need replacement parts from their first set so we don't have a large knowledge base of 'common' failures. They're similar in construction to the stock coils, so I'll say they should not be any better or worse regarding cold weather durability.
Good morning buddies I got the Beru spec sheet, the original coil value is:
54mJ @ 9A
I don't know the primary current of the ME7, but I think this should
fit pretty much.
So the P50 coil is from my point of view nearly the same like original and does not fit our needs.
54mJ @ 9A
I don't know the primary current of the ME7, but I think this should
fit pretty much.
So the P50 coil is from my point of view nearly the same like original and does not fit our needs.
That doesnt sound right. People are running the Evoms coil with plugs gapped wider than they do with the stock coils, and running them at higher power levels.
My Info about the coil should be 100% correct.
I am not saying that the EVOMS coil doesnt work because i dont know what they are using, abviously it is working.
I talked about the mentioned p50 from Bosch Motorsport where you could watch the data sheets online and which is less powerfull then original.
Regards
David
I am not saying that the EVOMS coil doesnt work because i dont know what they are using, abviously it is working.
I talked about the mentioned p50 from Bosch Motorsport where you could watch the data sheets online and which is less powerfull then original.
Regards
David
Last edited by Stroker; Jan 4, 2015 at 02:17 PM.
My Info about the coil should be 100% correct.
I am not saying that the EVOMS coil doesnt work because i dont know what the are using, abviously it is working.
I talked about the mentioned p50 from Bosch Motorsport where you could watch the data sheets online and which is less powerfull then original.
Regards
David
I am not saying that the EVOMS coil doesnt work because i dont know what the are using, abviously it is working.
I talked about the mentioned p50 from Bosch Motorsport where you could watch the data sheets online and which is less powerfull then original.
Regards
David
Thread
Thread Starter
Forum
Replies
Last Post
bongnation
Automobiles For Sale
9
Sep 25, 2015 02:58 PM
Gunther
Automotive Parts & Accessories For Sale/Wanted
1
Sep 10, 2015 10:30 AM







