SatNav update DB9 2005
#4
Just received and installed my updated version...works great, only thing missing is the AM logo on start-up, but we can live with that. Very fast shipping from Navigation.com the discs arrived the next day.
Thanks again vyr with out your help I would have been going in the wrong direction looking for an update, no pun intended
Thanks again vyr with out your help I would have been going in the wrong direction looking for an update, no pun intended
#5
The AM start up logo seems a bit random. Seems to depend on whether Nav was on when you last shut off the car. Have never figured it out and never worry about it.
At least it never says "Volvo"
At least it never says "Volvo"
#7
it is early days as I have not had time to use the GPS with the updated program, however I did notice that I could use the joy stick to move around the map and pin point a location and then set as a destination. I have only had the car for a couple of weeks so I am not sure that function was available before...I don't think it was but I could wrong.
once I have put the new update though it's paces I will give you an update
once I have put the new update though it's paces I will give you an update
Trending Topics
#8
Yvr, Conquerer have you had any issues with changing the trip meters from 1 to 2 and zeroing them, also I cannot change the LED speedo from kilometer to miles even though I follow the manuals instructions. The manual says to use the buttons on the navigation cluster T1 T2 to go from trip 1 to trip 2 and to hold for more than 3 secs to zero, to hold the read button along with the button on the signal stalk to change the trip computor dislpay units, not sure what the read botton does?
PS, the AM logo appeared on the screen!
PS, the AM logo appeared on the screen!
#9
I never really use the trip meters, but I've accidentally zeroed them while fiddling around.
I do switch between digital MPH and KPH regularly when crossing the border -- hold the button on the signal stalk while pressing and holding the "read" button for about 2-3 seconds. BTW -- this doesn't affect the ODO or trip meters, just the speed display.
I do switch between digital MPH and KPH regularly when crossing the border -- hold the button on the signal stalk while pressing and holding the "read" button for about 2-3 seconds. BTW -- this doesn't affect the ODO or trip meters, just the speed display.
#10
i must have an issue with both T1 T2 and read buttons as they are not changing the settings...like you the trip meter is not a big deal but i too like to change to MPH when i cross the boarder, I will have to take it in to the shop...thank you!
#13
SatNav update 2005 DB9
The SatNav update was for a Volvo C70 my06-07 they may have a more up to date version, this update is seamless to the Aston Martin SatNav
Thread
Thread Starter
Forum
Replies
Last Post