Window Module - 2007 DB9
Window Module - 2007 DB9
At the present time, after multiple resets, my driver's side side windows either doesn't drop, or go up properly when the door is opened or closed. I suspect it is the door module. What is the part number for the module - is it 6W6Z13C788AB?
Thanks
Scott
Thanks
Scott
Before you replace door modules check the door latch and the push/pull cables for the exterior door handle and key lock. The door latch microswitches can fail and the door module won't know what position the latch is in. The outer sheath of the cables can snap and prevent proper locking/opening. In my case both the key lock cable and the door latch had failed causing unreliable window drop on my passenger window. It's a lot cheaper to replace those two than to have the door modules swapped and re-coded by a dealer.
Before you replace door modules check the door latch and the push/pull cables for the exterior door handle and key lock. The door latch microswitches can fail and the door module won't know what position the latch is in. The outer sheath of the cables can snap and prevent proper locking/opening. In my case both the key lock cable and the door latch had failed causing unreliable window drop on my passenger window. It's a lot cheaper to replace those two than to have the door modules swapped and re-coded by a dealer.
Or "just" the door handle?
The door card, window glass and window regulator all have to come out to access both. I did it a couple times and as long as you give yourself a couple of witness marks on the glass and door it's pretty easy to get the glass back in and lined up.
Thread
Thread Starter
Forum
Replies
Last Post





