997 GT3 Style! DONE
Thread Starter
|
Former Vendor
Joined: May 2009
Posts: 700
From: DFW
Rep Power: 0
997 GT3 Style! DONE
Hey guys,
We wanted to share another special car with you. Our 6speed customer brought us his car wanting to add a new front bumper, rear bumper and rear spoiler. The project proved once again that the 997 is one amazing car.
Right out of the box, we re-prime and sand the bumper ensuring no ripples in the surface and a stock fit. Once the fit was right, we cut out a scoop into the bumper giving it that mean look.
We also took the extra time to paint the structural bumper brace so no silver would be seen through the custom grill we installed.
Next is the challenge of creating a custom meshing to fill in those aerodynamic gaps.
We measured the sizes, cut them out, and went to work.
The hand work paid off as the mesh was properly secured leaving us with quite a sight!
We wanted to share another special car with you. Our 6speed customer brought us his car wanting to add a new front bumper, rear bumper and rear spoiler. The project proved once again that the 997 is one amazing car.
Right out of the box, we re-prime and sand the bumper ensuring no ripples in the surface and a stock fit. Once the fit was right, we cut out a scoop into the bumper giving it that mean look.
We also took the extra time to paint the structural bumper brace so no silver would be seen through the custom grill we installed.
Next is the challenge of creating a custom meshing to fill in those aerodynamic gaps.
We measured the sizes, cut them out, and went to work.
The hand work paid off as the mesh was properly secured leaving us with quite a sight!
Thread Starter
|
Former Vendor
Joined: May 2009
Posts: 700
From: DFW
Rep Power: 0
To fill in the custom cut gap in the bumper, we molded in bumper diffusers onto the top.
Finally, we added the bottom lip to the bumper leaving her ready to be mounted.
Now for the other side….
In order to have the rear bumper fit stock and flush we had to cut out sections on each side of the housing.
With a proper fit ready to go, we started priming the bumper and the rear wing.
Last edited by StuartsPNB; Aug 24, 2009 at 03:40 PM.
Thread Starter
|
Former Vendor
Joined: May 2009
Posts: 700
From: DFW
Rep Power: 0
Once out of the booth, we bolted them on ensuring a snug fit.
Finally, came the time to put on the finished product!
Here is the beginning of our Signature clear wrap! This particular wrap was completed in 2 separate stages. First the car was wrapped from the hood down and bumper off. We broke it down into this 2 step process to best hide the lines from the wrap.
Finally, came the time to put on the finished product!
Here is the beginning of our Signature clear wrap! This particular wrap was completed in 2 separate stages. First the car was wrapped from the hood down and bumper off. We broke it down into this 2 step process to best hide the lines from the wrap.
Thread Starter
|
Former Vendor
Joined: May 2009
Posts: 700
From: DFW
Rep Power: 0
Once again, thank you for taking the time to see our projects in action!!!
We're here to answer all questions on advice or to schedule a time to evaluate a previous job to make sure it was done right. Any way we can help!!!
Thanks,
-Nathan
Last edited by StuartsPNB; Aug 24, 2009 at 03:41 PM.
Registered User
Joined: Jun 2007
Posts: 580
From: Miami, FL
Rep Power: 47
Trending Topics
Thread Starter
|
Former Vendor
Joined: May 2009
Posts: 700
From: DFW
Rep Power: 0
Thanks for the comments!
We appreciate the positive feedback and be on the lookout for more in the future.
