hi there i figured out what i did i remove the pin #1and#2 which is for data and i hook up them separately from the new headlights to the module from old headlight and power up and ground it the old module and the car thinks that the old headlights is in and everything works but not the high beam i cannot figure out why

 

Hi, Interested in doing this on my 2013 GTS.

Questions rear parking sensors, are they very different like the mount has changed or are they completely different and just don't work?
Are all the inner tailgate trims the same?
Will my GTS sport exhaust come through the revised bumper?

 

The parking sensors are different. It is a common Skoda / VW / Audi part - you can get them from ebay for lik $15 each.

Not sure what you mean by 'trims' - there are 4 palstic covers you have to replace. Two that cover the taillights from the sides and two on the tailgate itself.

Your old exhaust will not fit plug & play - the exhaust tips openings are in a slightly different locations, so you will have to visit a mufler shop to modify the exhaust tips' pipes to fit the new bumper.

 

Thanks for the reply.
Ref parking sensors, do the later ones still plug into the old harness?

Trims I refer to are the tail gate, inside trims and carpet area? if I was to buy a new one for instance will everything swap over?

 

I still don't know what you mean. Read this thread from the very beginning. All the parts that need to be changed are there, with pictures.

The new park sensors are plug & play connector wise. It is the housing that is different.

 

Thanks again for the reply.
I have found a complete tailgate now so trims as long as there black will be fine.

 

Its the ugly rear lights that make guys do it and the .2 is a lot more money.

 

Hello,

anyone who can do this job in canada, I’m in montreal, I have 958.1 Lights to be converted to 958.2 or newer

The panamera tail lights look incredible !!!

thank you

 

I was not able to confirm that the high beams would work after the conversion (all of the people I've spoken to had no working high beams) so I just put the turbo bumper.

Before:



After:


It was still worthwile for me as it was ... free. I had a small frontal collision and had to replace the front bumper (with LED bars and grills) anyway. It was all covered by the insurance.

 

This 958 looks awsome, do you have more pictures? Can you give few more details? How its done, and what is needed?

 

It is custom project, no parts for sale. Last one was better imo.

 

Looks killer ! More pictures in the panamera tailgate on cayenne ??
Details of how did he make that ? I am surely intrested in my 2014 958.1 .
Thanks in advance
Help appreciated

 

it was 955, lot of time ago)

 

Hello. I’m going to do the facelift on my Porsche Cayenne next week, and I want to know if I buy an empty tailgate, the parts from my old one will fit on the facelift tailgate

 

Yes exept all outer lights and camera frame.