Hey guys,

We wanted to share another special car with you. Our 6speed customer brought us his car wanting to add a new Misha front bumper, Misha rear bumper and rear spoiler. The project proved once again that the 997 is one amazing car.







Right out of the box, we re-prime and sand the bumper ensuring no ripples in the surface and a stock fit. Once the fit was right, we cut out a scoop into the bumper giving it that mean look.




We also took the extra time to paint the structural bumper brace so no silver would be seen through the custom grill we installed.



Next is the challenge of creating a custom meshing to fill in those aerodynamic gaps.




We measured the sizes, cut them out, and went to work.









The hand work paid off as the mesh was properly secured leaving us with quite a sight!

 

To fill in the custom cut gap in the bumper, we molded in bumper diffusers onto the top.







Finally, we added the bottom lip to the bumper leaving her ready to be mounted.






Now for the other side….



In order to have the rear bumper fit stock and flush we had to cut out sections on each side of the housing.





With a proper fit ready to go, we started priming the bumper and the read wing.

 

Once out of the booth, we bolted them on ensuring a snug fit.





Finally, came the time to put on the finished product!











Here is the beginning of our Signature clear wrap! This particular wrap was completed in 2 separate stages. First the car was wrapped from the hood down and bumper off. We broke it down into this 2 step process to best hide the lines from the wrap.

 

Second was the bumper. We lined her up, put her on, and began round two.












At last we had a beautifully wrapped 997. Now for the show!

 

Once again, thank you for taking the time to see our projects in action!!!

We here to answer all question on advice or to schedule a time to evaluate a previous job to make sure it was done right. Any way we can help!!!

Thanks,

-Nathan

 

Nice work!

That looks like Bara's car.

 

excellent work but.. why not just rap the entire hood an fenders? i mean you went as far as to wrap it with the bumper off and with the bumper scoop off. its just a shame that you can still see where the clear bra starts and finishes on the hood and fenders.

 

Excellent pictoral Nathan, thanks for sharing with us. I enjoyed the process and give Kudos to you and your staff for the quality represented!!

 

Great job! Showing the process makes me appreciate the final product even more. Thanks for posting.

 

Very nicely done. Always great to see attention to quality and pride of workmanship. Kudos to Stuarts. And thanks for taking the time to document and post your work on this project!

 

Thanks for the complements guys! Yes that is Bara's car. He also has a thread up with more pictures.... check it out!

"Misha + OE GT3 Aero Kit by StuartsPNB [PICS]"

 

Nice work!!

 

Beautiful, meticulous Job!

 

amazing clean job, thanks for sharing

 

excellent work .. love the work done to it.