New Guy Here 01 GPW S2000
New Guy Here 01 GPW S2000
Hey, Name"s Kitt, I'm 25 an live in Moyock,NC its the far northeast corner, on the Va line. I drive a 01 GPW AP1. I've had it for about 3yrs now. Shes a pain in my ***.
Mods include:
Interior:
Custom White leather wrapped Dash, Doors, Console, and Pillars
Greddy tri-gauge pillar w/ gauges
Team Voodoo Shift ****
Exterior:
OEM front Lip
JDM Clear Headlights
JDM Clear Side markers
OEM Rear Spoiler
VIS Eyebrows
Clear EK Fog conversion
VIS Terminator Carbon-Fiber hood (painted)
Engine/Exhaust:
Injen Intake
PowerRev Thermal manifold gasket
PasswordJDM Carbon-Fiber Cooling Plate
*Private Label* Header
Invidia 60mm Test Pipe
Invidia N1 70mm Dual exhaust
Drivetrain:
A.C.T. Stage 1 clutch
Fidanza 8lbs. Flywheel
P-Tunning Steel braided Clutch line
Ben Herne Stage 2 Diff
(Full Cryo,Polished Gears,AP2 House,PuddyMod Crush Collar,4.44 Final Ratio)
Accessories:
Password JDM Reservoir Tank Covers
Password JDM Magnetic Oil/Tranny drain plugs
Suspension:
BC BR-Type Coilovers
Cusco 32mm front Sway bar
Cusco 30mm rear Sway bar
Cusco Full Lower Sub Frame
PasswordJDM Rear Lower Frame Brace
T1R Race-Spec Forged Half-shaft Spacers
H&R 10mm TRAK+ wheel spacers
H&R extended wheel studs
Wheels:
5Zigen FN01R-C Hot Version
(Polished)
F: 17x8 43et. 33et w/spacers
R: 17x9 43et.
Hankook Ventus R-S2 tires
5Zigen Pro Racer Titanium Lugs
Brakes:
Brembo-Slotted/Cross-Drilled Rotors F/R
Rotora 4pot 11.8in Caliper Kit
Rotora Steel Braided Lines F/R
Rotora Pro Series pads F
Axxis Ultimate pads R
Motul RBF600 fluid
In Car Electronics:
Greddy E-Manage Ultimate EMS w/ BoomSlang Harness
Pioneer Head unit
Infinity Coponents
Rockford Amp













Mods include:
Interior:
Custom White leather wrapped Dash, Doors, Console, and Pillars
Greddy tri-gauge pillar w/ gauges
Team Voodoo Shift ****
Exterior:
OEM front Lip
JDM Clear Headlights
JDM Clear Side markers
OEM Rear Spoiler
VIS Eyebrows
Clear EK Fog conversion
VIS Terminator Carbon-Fiber hood (painted)
Engine/Exhaust:
Injen Intake
PowerRev Thermal manifold gasket
PasswordJDM Carbon-Fiber Cooling Plate
*Private Label* Header
Invidia 60mm Test Pipe
Invidia N1 70mm Dual exhaust
Drivetrain:
A.C.T. Stage 1 clutch
Fidanza 8lbs. Flywheel
P-Tunning Steel braided Clutch line
Ben Herne Stage 2 Diff
(Full Cryo,Polished Gears,AP2 House,PuddyMod Crush Collar,4.44 Final Ratio)
Accessories:
Password JDM Reservoir Tank Covers
Password JDM Magnetic Oil/Tranny drain plugs
Suspension:
BC BR-Type Coilovers
Cusco 32mm front Sway bar
Cusco 30mm rear Sway bar
Cusco Full Lower Sub Frame
PasswordJDM Rear Lower Frame Brace
T1R Race-Spec Forged Half-shaft Spacers
H&R 10mm TRAK+ wheel spacers
H&R extended wheel studs
Wheels:
5Zigen FN01R-C Hot Version
(Polished)
F: 17x8 43et. 33et w/spacers
R: 17x9 43et.
Hankook Ventus R-S2 tires
5Zigen Pro Racer Titanium Lugs
Brakes:
Brembo-Slotted/Cross-Drilled Rotors F/R
Rotora 4pot 11.8in Caliper Kit
Rotora Steel Braided Lines F/R
Rotora Pro Series pads F
Axxis Ultimate pads R
Motul RBF600 fluid
In Car Electronics:
Greddy E-Manage Ultimate EMS w/ BoomSlang Harness
Pioneer Head unit
Infinity Coponents
Rockford Amp













Last edited by S2Kitt; Dec 16, 2009 at 04:02 PM. Reason: Updated
Are you on s2ki....?
Love the GPW color but hate that white dash......omg! Mods are pretty clean for the most part, why did you pick to cover half your dash???
Still on the prowl for my white CR, we need more s2000 owners on here
Love the GPW color but hate that white dash......omg! Mods are pretty clean for the most part, why did you pick to cover half your dash???
Still on the prowl for my white CR, we need more s2000 owners on here
Yea I'm on S2Ki, S2Kitt is my name on all the forums.
I knowthe dash is a love it or hate it thing. I bought it like that. It was kool when I use to show the car, but now its just a pain to keep clean. But the biggest problem is listening to everyone talk **** about the dash b/c they think I spray panted it. The guy who did it knew what he was doing b/c its pretty seamless.
No glare really.
I use to have fogs but do to some cone-age at a previous Auto-X I broke one so i had to take the lights out. but had to leave the housings b/c of the cuting that was needed to install them.
Trending Topics
stickers are ment to **** w/ my dad an step-dad who owns a C5 an C3 corvette. My lil brother has the same corvette sticker on his boosted GSR integra. So its a family joke. An I don't really give a **** if it "offends" V8 owners.
Thread
Thread Starter
Forum
Replies
Last Post
Casino_Royale
Aston Martin
6
Sep 2, 2015 12:24 PM






