I've had several inquiries, so here's what I have from H&R:

Hubcentric.

I just got the spacers. Forgot to order the bolts seperate. What length do you recomend?

All I have is part numbers so I'm not sure the hardware specifics. Call/PM me with your spacer widths and I'll get you what you need.

7mm require a 50/51mm Removable Ball Seat Bolt

15mm requires a 60/62mm Removal Ball Seat Bolt

Damon-
I have 20" techarts.. your suggestion? its a 997S NOT a turbo.

thanks.

if u have aftermarket wheel chances are u don't need to add spacer since the offsets are already more aggressive. in ur case Techart wheels are already aggressive enough for the car imo.

how much total pm me and how to buy them !

i dont know anythig about cars....but i just got a 2008 c2s and i want to put the rims from the Turbo on my car? what do i need to do? i see some wheels that came off of a trubo on ebay for about 3500...do i need any spacers or what? or maybe i need smaller tires for these rims? thansk

OP: Check your PM

Hey- why don't we have a NB thread?

I have 15mm R and 7mm F H&R spacers, and still have room to bring wheels out (OEM S wheels w/ 67 offset). Will the H&R 23mm spacers fit the rear, and 15mm on front? anyone tried it?

I'm positive that 20mm spacers will fit the rear given the room left with the 15mm's installed, but I do not see any 20mm spacers listed. Goal is to bring the wheels out flush with fenders. Did this on my 996 and used 15mm HR spacers on F/R, perfect.

Damon any info on the spacer fit for 997? Perhaps I'll just go with 18mm on rear (15mm now)- would like to bring fronts out a bit more but I don't see anything other than 7mm or 14mm. I have the 7mm's on presently.

Hi Guys, What is the downside if any for spacers? Thanks.

I'd like to get a 7mm set with bolts.

Can you PM or email me? I'm too new to PM you.


Cheers
Aaron

I need spacers in the rear for my M5, but im currently running 295's, how much wider can i go? My car is not lowered.

how long is the wait for special orders?