GT2 Carbon Fiber Spoiler getting dull
#1
GT2 Carbon Fiber Spoiler getting dull
Hello...
So the GT2 wing is starting to get dull because of the caribbean sun.. any particluar experience or recommendation of how to work the Carbon Fiber (DIY)...
So the GT2 wing is starting to get dull because of the caribbean sun.. any particluar experience or recommendation of how to work the Carbon Fiber (DIY)...
#4
Wet sanding and buffing should help. I have a hood and a trunk that went totally dull\milky on my GC8 but it sits outside and does not get that much loving…
I have heard the quality of the clear coat they put on it is pretty important. Might want to get it resprayed with good quality clear coat. A good paintshop should have better suggestions on that. Try wet sanding and buffing first.
I have heard the quality of the clear coat they put on it is pretty important. Might want to get it resprayed with good quality clear coat. A good paintshop should have better suggestions on that. Try wet sanding and buffing first.
#6
have it sanded and re cleared, i am beyond **** about trying to keep on multiple layers of good wax on the CF, it doesn't sit in the sun much at all but even little will damage and yellow the CF. its a never ending fight essentially, good luck.
#7
Same happened to mine. Body shop applied several coats of high end automotive clear coat. Looks like.new.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post