Hi guys, some much needed information please
A guide for the removal of the OEM plenum and install of the IPD plenum would be of assistance.

Any write ups or photos available would be fantastic.
Any tips to be aware of
I plan to install on weekend.

 

tic toc, tic toc, tic toc >....??

 

Do a search here and on renn for this.

 

All of 17 posts down...tic tock....

 

It's nearly identical as the 997.1

Did you try the sticky?

b

 

whats the sticky ?
checked renn, nothing and nothing on speeders

 

https://www.6speedonline.com/forums/...-997-diys.html

 

997.1 not 997.2 - big difference

 

spoke with greg, here's writting some instructions for me as the A/C bolt needs to be changed.

 

Hey Molar, just wondering if you have any detailed install directions with photos of the IPD install. Would like to do the same on my 2009 997.2. Thanks

 

Unfortunately not, however Greg at IPD sent me some illustrations which were much needed.
Tight working space, must get those half moon clamps properly aligned over the rubber spacer, or air leak, must also cut from memory the OEM plenum actuator valve at the back.
Tricky install, must visualise, be thorough and take your time.
Good luck

 

How about performance results???