I did get the codes and it said front wheel sensor, replaced it and it still says the same thing that why we had to search further, and why I gave the rest of the algorhythm.

 

I fixed mine at last here is what I did, first I kept geting a code for front left wheel speed sensor, so I swapped the fronts and it stayed at the left so I knew it wasn't the sensor, only things left were ,wiring,abs unit or abs ring on axle. so I cleaned the ring still nothing next thing I ran a double 16ga wire from the wheel speed sensor direct to the abs box and wala its fixed!!! Reason I didn't do this a long time ago was every time I checked continuity it ohmed out fine, guess it was just weak in the harness or something. I just ordered a repair kit for the harness to fix it right.

Chris Green

 

Uh, Tom, I was addressing the OP....

 

Ok had my oil sender unit fixed today. The oil gauge is working again. They also tested for my ABS and PSM problem I mentioned to them and car returned zero codes – nothing. They said it was probably some debris or water – did I just wash the car? HUH? Well haven’t had the error since then. Is debris really a possible or just dealer BS to get me off their backs?

 

Dealer(s) have done the same steps with my car, first harness, then sensors. Now it looks to be the abs control unit. Good thing you were able to stop on the harness, the control unit and other associated new parts are expensive.

To the OP, good to see your car is working again.

 

anyway to test the MAF sensor to see if its bad?