When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Anyone looking for the Autosystems PCB board for the LED Array could likely pull the one out of this headlamp for $300 - LENS is cracked and xenon bulbs are pulled but you'd have spare ballasts & washer pump to boot.
Now to psych myself up for pulling the light out .... again. Blech.
Keep the ballast and pump as spares - you never know. If you have no use for the silver plastic shrouds I'll buy them off you and get you to ship 'em to my place in the US.
All they do is make a mess, headlamps need to be on to enable spray with the windscreen washers. They are on a dedicated circuit under hood fuse box #26 (20AMP) fuse. So if someone didn't want them to work, pull the fuse. Everything else will work.
I know, I had a seller in Florida demonstrate his worked and he immediately had to pull out a towel and dry off his bonnet. I'd just like to know if they DO work
All they do is make a mess, headlamps need to be on to enable spray with the windscreen washers. They are on a dedicated circuit under hood fuse box #26 (20AMP) fuse. So if someone didn't want them to work, pull the fuse. Everything else will work.
My bad, off topic again.
My fuse 26 is fine, but my lights are always on automatic. Is it the "automatic" that makes a difference?
No sir, on is on regardless of manual or auto position. Pumps can seize from lack of use. Supply lines are robust, and the pump is 2x the size of the windscreen pump. More audible so if you not hearing two different tones , could be the pump.
.
