Panamera resonator bypass
#1
03-18-2018, 07:27 PM
Join Date: Jan 2018
Location: Montreal
Age: 37
Posts: 60
Rep Power: 0 
Panamera resonator bypass
Hello,
I found this online in my city : wil it fit panamera 2012 base ( it says on the ad panamera turbo)
thank you
Last edited by moose loose; 03-18-2018 at 07:38 PM.
#2
03-19-2018, 02:29 PM
Join Date: Jan 2018
Location: Montreal
Age: 37
Posts: 60
Rep Power: 0 Answer from fabspeed :
These parts not interchangable as the sizing is different between a turbo and non turbo model.
too bad I thought they could be just welded
These parts not interchangable as the sizing is different between a turbo and non turbo model.
too bad I thought they could be just welded
#4
03-20-2018, 01:30 PM
Join Date: Jan 2018
Location: Montreal
Age: 37
Posts: 60
Rep Power: 0 I won’t do it myself, the exhaust shop will weld the pipes or bolt them ?
I thought the pipes were larger and no space to make them fit
the tubing and end sizes are different ?
can you please confirm
#5
03-21-2018, 07:00 AM
Registered User
Join Date: Mar 2017
Location: Huntsville, AL
Age: 58
Posts: 55
Rep Power: 0
A good exhaust shop will have everything needed to attach differing diameter tubing. Tell them the car you have and the diameter of the Fabspeed part you want installed. They should be able to tell you if they can do it. BTW the Fabspeed muffler package that I put on my 2012 V6 Panamera came with adapters made by Fabspeed. The adapter was about 6 inched long. The larger end attached to the Fabspeed tubing and the other end attached to the OEM tubing.
#6
03-21-2018, 09:29 AM
Join Date: Jan 2018
Location: Montreal
Age: 37
Posts: 60
Rep Power: 0 A good exhaust shop will have everything needed to attach differing diameter tubing. Tell them the car you have and the diameter of the Fabspeed part you want installed. They should be able to tell you if they can do it. BTW the Fabspeed muffler package that I put on my 2012 V6 Panamera came with adapters made by Fabspeed. The adapter was about 6 inched long. The larger end attached to the Fabspeed tubing and the other end attached to the OEM tubing.
ok thank you so much !
fabspeed answered me again it is possible :
‘’ Of course, anything is possible with the right tools and skills for fabrication. Please though, be aware that when fabricating and welding this tubing is 304 stainless steel and has to be welded accordingly. TIG or MIG welding only. ‘’
#7
04-17-2018, 02:47 PM
Join Date: Jan 2018
Location: Montreal
Age: 37
Posts: 60
Rep Power: 0 Hello,
I installed the fabspeed xpipe and put new tips, removed 3 resonators but the sound is very raspy... I know it is a V6 but I’m so unhappy with it... check the video
will a muffler delete be a deeper sound ? (And way too loud)
Thank you
Last edited by moose loose; 04-17-2018 at 03:19 PM.
Trending Topics
#8
04-22-2018, 08:15 AM
Join Date: Jan 2018
Location: Montreal
Age: 37
Posts: 60
Rep Power: 0 https://youtu.be/smODVKGkCRU
Hello,
I installed the fabspeed xpipe and put new tips, removed 3 resonators but the sound is very raspy... I know it is a V6 but I’m so unhappy with it... check the video
will a muffler delete be a deeper sound ? (And way too loud)
Thank you
Hello,
I installed the fabspeed xpipe and put new tips, removed 3 resonators but the sound is very raspy... I know it is a V6 but I’m so unhappy with it... check the video
will a muffler delete be a deeper sound ? (And way too loud)
Thank you
thank you
#9
01-22-2019, 08:31 AM
Like I mentioned before, muffler delete would give you a big bump in sound. If it's too loud you can always reinstall the factory mufflers then procure an inexpensive aftermarket axle-back system.
Thread
Thread Starter
Forum
Replies
Last Post
Nine_Eleven
996
17
08-28-2010 10:01 PM
Fabspeed Motorsport
Maserati
0
11-04-2009 09:04 AM