KA - In Memory of my Mom (Vincee) and best friend Michael J. Maring
Again a bit off topic, but sharkster, shouldn't the drive wheels be slightly climbing the rollers instead of being on the downslope? BTW, I had my Dynojet for 6 years(sold it a couple months ago), and I'm pretty sure that the proper procedure is climbing(so basically exactly the same position on the roller you have it in the video, just on the opposite side of the roller). Or is there a reason you have it the way it is?
Sorry for the hijack cjv. I hope the liners are finished this week as they are now shooting for. Keep the pictures coming, the final assembly of all this is the end result we have all been tuning in for.
Sorry for the hijack cjv. I hope the liners are finished this week as they are now shooting for. Keep the pictures coming, the final assembly of all this is the end result we have all been tuning in for.
Probably 1/3 of what Chad's will! As I was saying I can't imagine what his car is going to sound like with a pair of turbos at 8600rpms! Fred's car doesn't have a lot of engine mods so it's likely only another 15-20rwhp over stock at this point...
Thread Starter
|
Moderator
Joined: Jul 2003
Posts: 22,235
Rep Power: 1227
FrodeFE,
Performance Development still has my liners and water jackets. I told Neil to press the liners into the jackets and then hold them until he gets the rings. Hopefully any day now.
I just gave an order to Todd @ Protomotive for the new turbo's, external waste gates, MAF, low pressure air intakes and fuel pumps. He said it will take six weeks to acquire or make these parts. In the mean time, Rob @ S Car Go Racing should have he motor assembled along with making up the new set of headers.
What that means is tuning should start in May followed by ERP's finishing of the wide body and suspension. We are still looking at June.
Performance Development still has my liners and water jackets. I told Neil to press the liners into the jackets and then hold them until he gets the rings. Hopefully any day now.
I just gave an order to Todd @ Protomotive for the new turbo's, external waste gates, MAF, low pressure air intakes and fuel pumps. He said it will take six weeks to acquire or make these parts. In the mean time, Rob @ S Car Go Racing should have he motor assembled along with making up the new set of headers.
What that means is tuning should start in May followed by ERP's finishing of the wide body and suspension. We are still looking at June.
Last edited by cjv; Mar 2, 2008 at 08:03 AM.
Registered User
Joined: Apr 2005
Posts: 90
Rep Power: 25
So what turbos did you finally decide on - GT35's? You going to run the air intakes above the intercoolers?
Registered User
Joined: Sep 2005
Posts: 511
From: Bay Area,CA
Rep Power: 43
Hey Chad, been a while. I`m always bugging Rob( in a friendly way) about finishing your car. Have you ever thought about using K16/24`s????
Just kidding man, I`m curious to know also what turbos you`re ending up with, A custom turbine-compressor combo of some sort I bet.
Good luck
Just kidding man, I`m curious to know also what turbos you`re ending up with, A custom turbine-compressor combo of some sort I bet.
Good luck
Thread Starter
|
Moderator
Joined: Jul 2003
Posts: 22,235
Rep Power: 1227
We recieved some good news. I spoke with Neil @ Performance Developments today and he informed me our piston rings came in and the pistons, liners and liner holders will be shipping to S Car Go Racing today.
That does it for the motor parts. They are all in and the motor should be assembled shortly.
That does it for the motor parts. They are all in and the motor should be assembled shortly.
Thread Starter
|
Moderator
Joined: Jul 2003
Posts: 22,235
Rep Power: 1227
I spoke with Rob @ S Car Go Racing today. We have all the parts , however he has four motor builds in front of me. It doesn't appear my motor will be aasembled until June. After that we have the install into car (MAF, Headers, Wastegates, turbo's etc.) and then the tuning.
Realistic time frame............ August or September.
Realistic time frame............ August or September.
Last edited by cjv; Mar 30, 2008 at 11:52 PM.
Registered User
Joined: Sep 2006
Posts: 156
From: Montreal*Quebec...
Rep Power: 0
I spoke with Rob @ S Car Go Racing today. We have all the parts , however he has four motor builds in front of me. It doesn't appear my motor will be aasembled until June. After that we have the install into car (MAF, Headers, Wastegates, turbo's etc.) and then the tuning.
Realistic time frame............ August or September.
Realistic time frame............ August or September.
