Is this too tight?
Thread Starter
|
Registered User
Joined: Jun 2009
Posts: 334
From: Sweden
Rep Power: 38
Is this too tight?
Looking at a set of Victor Eqipment wheels with below specs.
Front 18x8" = ET 45
Rear 18x11"= ET 25
Running 225 in the front and 295 rear.
Will they fit a 996tt?
Thanks,
JE
Front 18x8" = ET 45
Rear 18x11"= ET 25
Running 225 in the front and 295 rear.
Will they fit a 996tt?
Thanks,
JE
I have ET35 rear on a 19x12 wheel and its flush. I rolled my fenders.
I think ET25 on 18x11 is definetly doable. Rolling fenders will be a must in the rear.
Front is good.
I think ET25 on 18x11 is definetly doable. Rolling fenders will be a must in the rear.
Front is good.
__________________
#TeamAIM
997TT SilverSpool - 210.8 mph 1/2 Mile WR Apr 2019, 9.2 @ 168 mph 1/4 Mile Manual World Record , 3.15 60-130 mph , 2.72 100-150 mph , 1400whp E85
996TT SpoolBus - 204.6 mph 1/2 Mile 996TT WR Aug 2018, 9.5 @ 154 mph, 3.23 60-130 mph, 2.5 100-150 mph Manual Porsche World Record, 1400whp E85
997TT SlowBerry - 205.0 mph 1/2 Mile WR Nov 2018, 9.7 @ 170 mph 1/4 Mile , 3.2 60-130 mph , 2.4 100-150 mph , 1420whp E85
ESMOTOR | DO88 | TPC DSC | SYVECS | COBB | IPD | KLINE | XONA | AMS | ID | ERP | SACHS | TURBOSMART | CSF | DODSON |
#TeamAIM
997TT SilverSpool - 210.8 mph 1/2 Mile WR Apr 2019, 9.2 @ 168 mph 1/4 Mile Manual World Record , 3.15 60-130 mph , 2.72 100-150 mph , 1400whp E85
996TT SpoolBus - 204.6 mph 1/2 Mile 996TT WR Aug 2018, 9.5 @ 154 mph, 3.23 60-130 mph, 2.5 100-150 mph Manual Porsche World Record, 1400whp E85
997TT SlowBerry - 205.0 mph 1/2 Mile WR Nov 2018, 9.7 @ 170 mph 1/4 Mile , 3.2 60-130 mph , 2.4 100-150 mph , 1420whp E85
ESMOTOR | DO88 | TPC DSC | SYVECS | COBB | IPD | KLINE | XONA | AMS | ID | ERP | SACHS | TURBOSMART | CSF | DODSON |
Registered User
Joined: Jul 2009
Posts: 2,058
From: Florida
Rep Power: 125
I found this offset calculator very helpful when selecting offsets?
http://www.1010tires.com/WheelOffsetCalculator.asp
http://www.discounttiredirect.com/di...gle%2BNational
http://www.1010tires.com/WheelOffsetCalculator.asp
http://www.discounttiredirect.com/di...gle%2BNational
Registered User
Joined: Nov 2007
Posts: 1,457
From: Mandeville, LA
Rep Power: 134
I think thats what I am running. I need to roll my rears.s On big dips, I hear it rub but have no visible impact.
Trending Topics
Thread Starter
|
Registered User
Joined: Jun 2009
Posts: 334
From: Sweden
Rep Power: 38
I used to run my stock wheels in the rear (11" ET 45) together with a 20mm spacer and they would protrude outside of the wheel arches and it did not look nice. I had the spacers machined down to 14mm and it looks great. Correct me if I'm wrong but isn't a 11" ET 45 wheel with a 20mm spacer the same as a 11" ET25 wheel? As a result I would end up with the same look as the stock wheels with a 20mm spacer...........
@ 2muchtime, yes I have seen that offset calculator.
@ 2muchtime, yes I have seen that offset calculator.
Registered User
Joined: Jul 2009
Posts: 2,058
From: Florida
Rep Power: 125
FWIW I'm running 18 x 12 with 26 offset and they fit flush with the outside fender. Mine is not yet lowered so there is no rubbing issues..yet
Thread
Thread Starter
Forum
Replies
Last Post
randalldahme
6speed Technical Information forum
2
Feb 19, 2016 03:56 PM
Wheeler
Automobiles For Sale
2
Sep 22, 2015 08:02 PM
