WOW! ROTtec 997.1 DRL LED's
Registered User
Joined: Sep 2010
Posts: 650
From: Las Vegas
Rep Power: 52
I'm no electrician, but if someone has the right electrical diagnostic tools they could check for whatever the resistors are designed to do, and if the equipment reads different values between the left assembly and the right one which gives an error message then you will know that there is a discrepancy between the two lights. This discrepancy in readings would prove that there is an inherent defect within the right light assembly - if one was to exist. If there is no discrepancy, but the right light produces an error message, then perhaps it has something to do with the car's light module or the right light wiring loom.
However from what we are seeing many issues tend to come from the right light which makes me think that it is a defect related to assembly/design with the right DRL LED light. But what do I know...
However from what we are seeing many issues tend to come from the right light which makes me think that it is a defect related to assembly/design with the right DRL LED light. But what do I know...
Last edited by DirtyVegas; Dec 30, 2011 at 02:11 PM.
The last time took my 45 minutes just to get them back out of the bumper!
Registered User
Joined: Sep 2010
Posts: 650
From: Las Vegas
Rep Power: 52
Resistors in, error msg out. Took about 10 minutes to do both. Hopefully there will be no further suprises. These DRL LED are good looking though...
Last edited by DirtyVegas; Dec 31, 2011 at 05:34 PM.
Registered User
Joined: Jun 2009
Posts: 451
From: So Cal
Rep Power: 42
I'm still looking for some input on whether there is any downside to installing these plug-in resistors to both lights? Even if the car is only throwing a right side code, wouldn't it be smart to install resistors to both sides to be completely covered and safe?
Ray, any insight? Anybody else?
Registered User
Joined: Nov 2011
Posts: 1,019
From: Toronto AREA of CANADA
Rep Power: 63
interesting question jay jones, I would like to know this as well. Ray do we install resistors on both side or just the problematic side?
if the left does not have an error then it does not have a faulty resistor i imagine
if the left does not have an error then it does not have a faulty resistor i imagine
I installed only on the problem side and it has gone away. I drove about 45 minutes today. I'm holding the other one in reserve in case I need it in the future.
Registered User
Joined: Feb 2010
Posts: 249
From: Sactown, California
Rep Power: 30
HAPPY NEW YEAR EVERYONE!!!!!
Install both resistors to make it even on both sides.
ROTTEC & ORANGE TUNING, and the other DRL led on sale on EBAY are all the same.
Compared my DRLs from Frank @ ORANGE TUNING and a friends ROTTECS from Ray and both are identical.
All they need to do is add resistors to the middle city light/parking light plug and everything will be fine.
My DRL mod list:
*DRL led front replacement lights
*Resistors (both sides) for city/parking lights
*Dectane DRL module
*Wired so that DRL is on whether headlights are off or on, but DRL is off when FOG light switch is on.
Additional pix and a vid of the DRLs
Hope everyone loves their DRLs
http://www.youtube.com/watch?v=gj_Hx...ature=youtu.be
Install both resistors to make it even on both sides.
ROTTEC & ORANGE TUNING, and the other DRL led on sale on EBAY are all the same.
Compared my DRLs from Frank @ ORANGE TUNING and a friends ROTTECS from Ray and both are identical.
All they need to do is add resistors to the middle city light/parking light plug and everything will be fine.
My DRL mod list:
*DRL led front replacement lights
*Resistors (both sides) for city/parking lights
*Dectane DRL module
*Wired so that DRL is on whether headlights are off or on, but DRL is off when FOG light switch is on.
Additional pix and a vid of the DRLs
Hope everyone loves their DRLs
http://www.youtube.com/watch?v=gj_Hx...ature=youtu.be
Last edited by jbigelow_1; Jan 1, 2012 at 11:59 AM.
Registered User
Joined: Dec 2011
Posts: 96
From: Chicago
Rep Power: 27
Jbigelow, very nice and love the rears they look very oem 997.2
What modue did you use for the drl I'm looking for simple auto on.
What exhaust do you have is it stock or did you do something? Sounds great
I found these on the bay.
http://www.ebay.com/itm/LED-Daytime-...#ht_3837wt_922
What modue did you use for the drl I'm looking for simple auto on.
What exhaust do you have is it stock or did you do something? Sounds great
I found these on the bay.
http://www.ebay.com/itm/LED-Daytime-...#ht_3837wt_922
Last edited by MB7000; Jan 1, 2012 at 12:24 PM.
Registered User
Joined: Feb 2010
Posts: 249
From: Sactown, California
Rep Power: 30
For the DRL module, I used DECTANE TFLM-03
Read the first post on this thread... it explains the 3 different modules available from DECTANE.
Gdluck
https://www.6speedonline.com/forums/...dule-easy.html
Registered User
Joined: Jun 2004
Posts: 857
From: San Jose, CA
Rep Power: 63
Well, I thought I was free and clear after 200 miles with no errors but I was mistaken. After a canyon drive yesterday through the twisties I got the right light error. PM sent Ray, please send me my resistors 
BTW, everyone who sees the lights loves them, they look awesome!
BTW, everyone who sees the lights loves them, they look awesome!
Former Vendor
Joined: Feb 2004
Posts: 4,111
From: Vancouver Canada
Rep Power: 0
Well, I thought I was free and clear after 200 miles with no errors but I was mistaken. After a canyon drive yesterday through the twisties I got the right light error. PM sent Ray, please send me my resistors
BTW, everyone who sees the lights loves them, they look awesome!
BTW, everyone who sees the lights loves them, they look awesome!
Registered User
Joined: May 2011
Posts: 25
From: somewhere in spain
Rep Power: 16
Ray, I need another set for a friend here in Madrid.
Please keep them for me as I need to come back with a bulbs order too.
Apart of this, I will need resistors .. I keep getting the fault msg, both left & right .
Please keep them for me as I need to come back with a bulbs order too.
Apart of this, I will need resistors .. I keep getting the fault msg, both left & right .