WOW! ROTtec 997.1 DRL LED's
Registered User
Joined: Jul 2011
Posts: 191
From: Franktown, Colorado
Rep Power: 26
What I do not get is that if it is a light module in our cars that is the issue, why is it that only one side is affected and not both? Shouldn't we be then seeing lights out on all sides? And what about other issues? There are just too many of them. I really think that this is a LED DRL quality and assembly issue rather than our cars.
I think the design/quality is bad for this product all together despite it 'looking good' to an outside observer, and that it has predominantly affected the right side light assembly for which we now have to use an outside resistor for.
I appreciate the potential resolution to this, but I just do not appreciate my car being blamed for a problem that seems obviously related to the product design/quality. I mean how many of us have bought the Depo/Dectane lights, and how many had issues? Very few. If the math is done, it is obvious that these LED DRL have a much higher defect rate than other similar products that we use. I think this product was rushed to market under poor design/quality despite the delays and the resons given us stating the opposite.
I think the design/quality is bad for this product all together despite it 'looking good' to an outside observer, and that it has predominantly affected the right side light assembly for which we now have to use an outside resistor for.
I appreciate the potential resolution to this, but I just do not appreciate my car being blamed for a problem that seems obviously related to the product design/quality. I mean how many of us have bought the Depo/Dectane lights, and how many had issues? Very few. If the math is done, it is obvious that these LED DRL have a much higher defect rate than other similar products that we use. I think this product was rushed to market under poor design/quality despite the delays and the resons given us stating the opposite.
The system is designed to work with regular incandescent bulbs that use a filament that draws a very predictable amount of current. If the current draw goes down or away the system interprets that as a failed bulb. LED's by their nature have an extremely low current draw. In some cars you won't get an alert due to minor variances in the sensitivity of the monitoring system. Or your car may have different factory options than another car. This can result in your car having a different wiring loom that the other car. A longer or shorter wiring loom can change the resistance in a given circuit enough to impact whether the monitoring system alarms or not.
Vendors can take the belt & suspenders approach and ship resistors with every kit but that adds extra cost and many people wonder what the resistors are for when the install their lights and they work fine (like mine) without the resistors.
I also remember lots of folks having similar issues with the Dectane rear LED's when they first came out. Some needed resistors, many didn't.
Registered User
Joined: May 2010
Posts: 805
From: ATL
Rep Power: 64
Maybe someone can post something more specific.
Maybe something like , and would do the trick, or similar items from your local Sears, Home Depot, etc
Registered User
Joined: Oct 2007
Posts: 1,447
From: Southern California
Rep Power: 111
Happy to report that I have installed my DRL's and have no codes! They look fantastic... thanks Ray!
However, I also installed the replacement Xenon's and have an issue with one of the bulbs wanting to go out after being on for a few moments. I assume it's a resistance problem (bulb heating up). Will be contacting Ray about it. Anybody else run into this issue?
However, I also installed the replacement Xenon's and have an issue with one of the bulbs wanting to go out after being on for a few moments. I assume it's a resistance problem (bulb heating up). Will be contacting Ray about it. Anybody else run into this issue?
Former Vendor
Joined: Feb 2004
Posts: 4,111
From: Vancouver Canada
Rep Power: 0
Happy to report that I have installed my DRL's and have no codes! They look fantastic... thanks Ray!
However, I also installed the replacement Xenon's and have an issue with one of the bulbs wanting to go out after being on for a few moments. I assume it's a resistance problem (bulb heating up). Will be contacting Ray about it. Anybody else run into this issue?
However, I also installed the replacement Xenon's and have an issue with one of the bulbs wanting to go out after being on for a few moments. I assume it's a resistance problem (bulb heating up). Will be contacting Ray about it. Anybody else run into this issue?
Registered User
Joined: Dec 2005
Posts: 2,390
From: socal
Rep Power: 144
This is great news for everyone! This after-purchase support is what sets you apart from the overseas distributors, keep it up Ray!
