Great, I'll get in touch, thank you

 

Amablemiguel how are you getting on? PSM back on? Does it clear itself or do you have to clear it with Piwiis?

NN thanks for the Russian details but with flight/hotel/visa it's too expensive to make sense. I need another solution or just keep the original wheel

 

Gtrust, how are you?

Well not quite as common as the first days. I find that it's appearing less but yes it does come on some times but will not stay on. It will reset itself back to normal. Still i have not got the chance to stop my CTT to swap the battery and rear sensors though. When i do i'll have a definity answer. I talked to my tech about the hacking of the module and he says that he would like to know how they connect to it but that he's got some friends that know about hacking ECU's and stuff and he'll ask them about this.

 

Amablemiguel, tell us is your PSM error there or not?

 

Without too many words!!!

 

I said it comes and goes but at least I see it once a day.

 

thanks for that... >_>

 

Amablemiguel, I didn't want to be rude, and I am sorry if you feel I was.

So your PSM error is still there and you hope to fix it by changing battery or/and rear ABS sensors.

Keep us informed!

 

never mind.. Chilling ^^ I'll see because PIWIS says I have a bad wheel sensor. I replaced the fronts because they're reachable but the rears I need to take off the calipers which I have not done yet. The battery I need to replace but looking to buy an aftermarket which has me thinking because I do not like to mess with non OEM stuff. They're charging me $805 for a new battery >_>

 

With my tech bailing out I'm going to do it myself and then get it coded. The only information I'm missing is the first half of the 2015 wiring for the large plug, any chance you have the rest of that picture?

 

I'm out of town for the weekend but I'll get it for you.

 

Gtrust, I have one in Russian, but I think it's easy to define the wiring even without the proper description, at least until you get the English version.

Please note that on pre-restyle cars there is no wire to be connected to point A5 (Cruise control main switch). I just left it empty, but still all functions work normally.

 

also correct.

 

Thanks very much, just need to order a tool to repin the plugs. Might end up buying a PIWIS 2 at this rate!

 

jejejeje I said that also. Now my best friend got an 08 CTT and we are modding. Is troublesome to keep going to the shop because we only need the PIWIS. I saw 2 original ones new on Ebay for $2,200. Still thinking if yes or no. Maybe Serg123 can light us on this. ^^