V8 Vantage ECU Tuning Results - VelocityAP V2 & V3 Software Upgrades
btw, There just happens to be a V8V with the Ver.3 tune listed over in the marketplace forum.
As told to me by a friend.
As told to me by a friend.
Not for just the intakes, no.
__________________
Stuart Dickinson
Managing Director
Velocity Automotive Performance Limited
206 Maple Avenue
Oliver, BC
Canada V2A 4W6
Office: (1)250-485-5126
www.velocityap.com
Stuart Dickinson
Managing Director
Velocity Automotive Performance Limited
206 Maple Avenue
Oliver, BC
Canada V2A 4W6
Office: (1)250-485-5126
www.velocityap.com
That entire upgrade would be the same as cutting holes in your intake boxes. The engine software has minor differences; there's the addition of the mapping to operate the air filter box bypass valves and the AFR is tweaked to run a leaner mix (at 7k, stock = 10.58:1 vs AMR 11.32:1). As for any additional edits in the AMR software to increase performance over the base model 4.3, the AMR software matches everything else...including baseline spark. However there's a bump in the MBT spark to help enable that extra 20bhp as advertised (providing the pump fuel can achieve the results)
With the above said; The reaction is the same for any 4.3L owner, regardless of the base tune or even when fitted with the AMR goodies.
__________________
__________________
Technical Director
Christopher Edgett
Velocity Automotive Performance Limited
214 Maple Ave.
Oliver, B.C
Canada V0H 1T9
Office: (1)250-485-5126
Email: Tuning@VelocityAP.com
www.velocityap.com
__________________
Technical Director
Christopher Edgett
Velocity Automotive Performance Limited
214 Maple Ave.
Oliver, B.C
Canada V0H 1T9
Office: (1)250-485-5126
Email: Tuning@VelocityAP.com
www.velocityap.com
I saw a new never installed tuner for sale in the marketplace on this forum. Is there a way to know what tune is on it and can you choose any parameters on the tuner? For instance, can I select that I have a manual transmission car with twin plate clutch, exhaust, 200 cell cats? And then later if adding headers, change the tune via the tuner or do I need to get a new file?
I saw a new never installed tuner for sale in the marketplace on this forum. Is there a way to know what tune is on it and can you choose any parameters on the tuner? For instance, can I select that I have a manual transmission car with twin plate clutch, exhaust, 200 cell cats? And then later if adding headers, change the tune via the tuner or do I need to get a new file?
If the tuning device was never used and client never requested a file to be made (but it was paid in full), then yes a file could be made for your vehicle to adapt all your mods at time of file submission. However, the client would need to supply you with the VAP order number, so you can claim the tune for that device.
__________________
__________________
Technical Director
Christopher Edgett
Velocity Automotive Performance Limited
214 Maple Ave.
Oliver, B.C
Canada V0H 1T9
Office: (1)250-485-5126
Email: Tuning@VelocityAP.com
www.velocityap.com
__________________
Technical Director
Christopher Edgett
Velocity Automotive Performance Limited
214 Maple Ave.
Oliver, B.C
Canada V0H 1T9
Office: (1)250-485-5126
Email: Tuning@VelocityAP.com
www.velocityap.com
Thread
Thread Starter
Forum
Replies
Last Post
Jibberingloon
Aston Martin
7
Sep 12, 2017 08:03 PM
Stuart@VelocityAP
Aston Martin
7
Oct 7, 2015 12:23 PM










