997TT MK.1 PCM 3 conversion DONE :) - Page 38 - 6SpeedOnline

Mar 26, 2018 | 04:13 PM

#556

Stroker

Registered User

Joined: Dec 2012

Posts: 132

From: Germany

Rep Power: 19

Hey guys, as I want to speed things up a bit I would like to come up with some questions and hope to get some help:

- does it better which climatic module to buy?
- which pin has to be repined?
- is a special pin needed?

- does it matter which switch panel (sport, wing,..) to buy or not?
- Are those connectors and wiring just plug and play from the 997.1 loom?

- is the option "XM radio" achievable through coding to are those radios coming with different hardware compared to the ones without this option on the sticker?

- I bouhgt the bose amp, but wondering if my 997.1 comes with the right connector to connect it or if i have to buy the connector and if yes, where can i get it?

Thanks for your support
David

Mar 27, 2018 | 05:59 AM

#557

Serg124

Registered User

Joined: Mar 2013

Posts: 567

From: Russia

Rep Power: 74

I think you should buy switch panel according to your car, same with climate...
XM module is a hardware option, as dvd-changer, if you want it you should find correct unit.
All connectors and pins available at almost any vag dealer, rarely from mercedes or bmw

Mar 27, 2018 | 08:44 AM

#558

Mark @ AIM Performance

Basic Sponsor

Joined: Dec 2009

Posts: 6,584

From: S.Plainfield, NJ

Rep Power: 856

Quote:

Originally Posted by Stroker

Climate module has to match the options you have such as heated seats or no. Also the buttons strip has to match if you have sport chrono or not.

Here is what I used:

997.2 OEM Navigation 997.642.971.XFTC 997.1.5 OEM Climate Control 997.653.205.02 NO HEATED SEATS
997.1.5 OEM Combined Switch (buttons) 997.613.545.00 NO SPORT CHRONO
997.2 OEM Lower Pocket 997.553143.02.A05
997.2 OEM Bose Amplifier 7PP.035.223.P MY CAR HAD BOSE
997.2 OEM GPS Antenna Cable 997.612.030.75
iPod / Aux Retrofit Tray Mat 997.553.613.00
iPod / Aux Retrofit Interface 997.642.465.00.01C
iPod / Aux Retrofit iPod Cable 997.612.471.02
iPod / Aux Retrofit PCM 3.0 Harness
997.612.049.75ISO
Quadlock Adapter
PCM Fiber Optic Plug Bridge x2

__________________
#TeamAIM
997TT SilverSpool - 210.8 mph 1/2 Mile WR Apr 2019, 9.2 @ 168 mph 1/4 Mile Manual World Record , 3.15 60-130 mph , 2.72 100-150 mph , 1400whp E85
996TT SpoolBus - 204.6 mph 1/2 Mile 996TT WR Aug 2018, 9.5 @ 154 mph, 3.23 60-130 mph, 2.5 100-150 mph Manual Porsche World Record, 1400whp E85
997TT SlowBerry - 205.0 mph 1/2 Mile WR Nov 2018, 9.7 @ 170 mph 1/4 Mile , 3.2 60-130 mph , 2.4 100-150 mph , 1420whp E85
ESMOTOR | DO88 | TPC DSC | SYVECS | COBB | IPD | KLINE | XONA | AMS | ID | ERP | SACHS | TURBOSMART | CSF | DODSON |

Last edited by Mark @ AIM Performance; Mar 27, 2018 at 08:59 AM.

Mar 27, 2018 | 11:37 AM

#559

Stroker

Registered User

Joined: Dec 2012

Posts: 132

From: Germany

Rep Power: 19

Thank you, this is really helpfull!!!

Regards
David

Mar 27, 2018 | 11:42 AM

#560

Mark @ AIM Performance

Basic Sponsor

Joined: Dec 2009

Posts: 6,584

From: S.Plainfield, NJ

Rep Power: 856

Quote:

Originally Posted by Stroker

Thank you, this is really helpfull!!!

Regards
David

u r welcome.

do you have heated seats and sport chrono?

Mar 27, 2018 | 01:43 PM

#561

Stroker

Registered User

Joined: Dec 2012

Posts: 132

From: Germany

Rep Power: 19

I had heated seats and now have GT2 RS seats without heating.
Sportchrono I have, yes.
Regards

Mar 27, 2018 | 03:37 PM

#562

Mark @ AIM Performance

Basic Sponsor

Joined: Dec 2009

Posts: 6,584

From: S.Plainfield, NJ

Rep Power: 856

Climate Control
997.653.205.02
997.653.215.02 W/ Heated Seats
997.653.225.02 W/ Heated and Cooled Seats

Button Strip
997.613.545.00 Without Sport Chrono
997.613.547.00 With Sport Chrono
997.613.539.00 GT2 / Without Spoiler Button

Mar 28, 2018 | 04:46 AM

#563

Stroker

Registered User

Joined: Dec 2012

Posts: 132

From: Germany

Rep Power: 19

Thanks again.

So I will order:

Climate Control:
997.653.205.02

and

Button Strip:
(as I have GT2 rear wing mounted)
997.613.539.00 GT2 / Without Spoiler Button

Apr 20, 2018 | 04:46 AM

#564

Stroker

Registered User

Joined: Dec 2012

Posts: 132

From: Germany

Rep Power: 19

Hi guys, this post below and the details about this topic still confusing me a bit.

I will buy the unit with the part number: 997 653 205 02

so is it still necessary then to change hardware like

- heating sensor -> could someone provide a part number
- compressor control switch
- FM antenna control box -> could someone provide a part number?

Thanks for helping
David

Quote:

Originally Posted by yah996

The 997.2 controls the ac compressor direct over a relay from the user ac control panel. The 997.1 controls the ac compressor from the MCU over a software command, complete different wiring. So there is no plug and play.
i tooked a look at both wiring diagram, it is doable but you will have maybe to cut wires and add some electronic and and...

Less efford and the only working solution would be, buy a 2009 997.1 turbo ac control unit from ebay or teile.com. There will be one problem left, the heating sensor is also differnt, serge explaint already. But that would be easy to fix.

After all this swaps, you will maybe find out, the PCM 3 is also dated.

A dension will work and will do a BT streaming for spotify.
If have both PCM,s for me the look is the only big differnt.

Also don't forget the change the FM antenna amplifer control box. The PCM 3 uses a single wire antenna diversty.

Apr 20, 2018 | 07:19 AM

#565

Mark @ AIM Performance

Basic Sponsor

Joined: Dec 2009

Posts: 6,584

From: S.Plainfield, NJ

Rep Power: 856

Quote:

Originally Posted by Stroker

do not need heating sensor, do not need compressor control switch, I don't even think this exists ( this is solved by swapping one pin on the connector) , do not need fm antenna control box.

Apr 20, 2018 | 08:03 AM

#566

Stroker

Registered User

Joined: Dec 2012

Posts: 132

From: Germany

Rep Power: 19

Wow, this sounds great, to good to be true

Makes life a lot easier, I will start next week.

Apr 21, 2018 | 02:31 AM

#567

Stroker

Registered User

Joined: Dec 2012

Posts: 132

From: Germany

Rep Power: 19

Hi guys, some short question.

- Where and how to mount the ne Bose amp?

- is the Navi Pc in the trunk still needed or does the PCM3 calculate all by itself?

Thanks David

Attached Thumbnails

Click image for larger version

Name: 2018-04-21-PHOTO-00002543.jpg
Views: 73
Size: 99.3 KB
ID: 524579

Click image for larger version

Name: 2018-04-21-PHOTO-00002544.jpg
Views: 78
Size: 100.8 KB
ID: 524580

Click image for larger version

Name: 2018-04-21-PHOTO-00002545.jpg
Views: 76
Size: 98.5 KB
ID: 524581

Apr 21, 2018 | 02:42 AM

#568

Serg124

Registered User

Joined: Mar 2013

Posts: 567

From: Russia

Rep Power: 74

Any old units should be removed - navi box, phone unit etc
I placed new amp at old place, mount is selfmade from some metal scrap...

Attached Thumbnails

Click image for larger version

Name: DSC_1075.JPG
Views: 55
Size: 1.36 MB
ID: 524582

Apr 21, 2018 | 02:49 AM

#569

Stroker

Registered User

Joined: Dec 2012

Posts: 132

From: Germany

Rep Power: 19

Okay, thanks.

In my wiring the Bose is under the passenger seat.

Does anyone has the correct wiring diag with the Bose in front?

Apr 21, 2018 | 02:49 AM

#570

Serg124

Registered User

Joined: Mar 2013

Posts: 567

From: Russia

Rep Power: 74

Quote:

Originally Posted by prodigymb

do not need heating sensor, do not need compressor control switch, I don't even think this exists ( this is solved by swapping one pin on the connector) , do not need fm antenna control box.

Hello,
I didn't find your whole story about your installation, please write it here since since (as I understand) you've done it and all things working, it is very interesting and important for those who not started or finished yet.